• New
    WISECO Forged Piston Ø65.00mm for YAMAHA YFZ 350 BANSHEE 2WD 1988-2007
    WISECO Forged Piston Ø65.00mm for YAMAHA YFZ 350 BANSHEE 2WD 1988-2007

    WISECO Forged Piston Ø65.00mm for YAMAHA YFZ 350 BANSHEE 2WD 1988-2007

    Review (0)
    €294.90
    Tax Included
    Bajo pedido, plazo confirmado en 24 horas.

    The piston moves up and down in the cylinder to turn combustion into motion: this kit replaces it along with its rings, pin and clips.

    Quantity :
    On order

    Bajo pedido, plazo confirmado en 24 horas.

      WISECO offers this piston kit for YAMAHA YFZ 350 BANSHEE 2WD 1988-2007. The piston slides in the cylinder and takes the force of the air-fuel combustion, passing it to the connecting rod and crankshaft.

      Why choose a forged piston?

      Instead of simply being cast, a forged piston is hot-pressed under very high pressure and then machined: its metal is denser and free of air pockets.

      • Stronger when hot: it copes better with high revs, overheating and detonation.
      • Lighter for the same strength: less stress on the connecting rod and bearings.
      • Good to know: depending on the alloy, it expands a little more and is fitted with more clearance; slight noise when cold is normal.
      • Why does it cost more? Forging tools, full machining and surface treatments cost more than simple casting.

      Why choose WISECO?

      Wiseco has forged its pistons in Mentor (Ohio, USA) since 1941 and controls the whole process, from aluminium bar to the friction-reducing ArmorGlide skirt coating. Its pistons are developed with Team Honda HRC in Supercross (450 class since 2018).

      When should you replace the piston on your YAMAHA YFZ 350 BANSHEE 2WD?

      Harder starting, loss of power, blue smoke, oil consumption or a knock when cold: these are the signs of a tired top end.

      No manufacturer hour figure for this model. Cross-Mania guideline: compression check every 30 h in hard use and every 60 h for leisure.

      Specifications and fitting tips

      • Piston compression: Standard
      • Manufacturer part number: K136

      Cross-Mania tip: Measure the cylinder bore before ordering: the piston must match your cylinder size. Follow the manufacturer's break-in procedure and replace the top-end gaskets at the same time.

      Also needed with this part

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      YAMAHA YFZ 350 BANSHEE 2WD 2007
      YAMAHA YFZ 350 BANSHEE 2WD 2006
      YAMAHA YFZ 350 BANSHEE 2WD 2005
      YAMAHA YFZ 350 BANSHEE 2WD 2004
      YAMAHA YFZ 350 BANSHEE 2WD 2003
      YAMAHA YFZ 350 BANSHEE 2WD 2002
      YAMAHA YFZ 350 BANSHEE 2WD 2001
      YAMAHA YFZ 350 BANSHEE 2WD 2000
      YAMAHA YFZ 350 BANSHEE 2WD 1999
      YAMAHA YFZ 350 BANSHEE 2WD 1998
      YAMAHA YFZ 350 BANSHEE 2WD 1997
      YAMAHA YFZ 350 BANSHEE 2WD 1996
      YAMAHA YFZ 350 BANSHEE 2WD 1995
      YAMAHA YFZ 350 BANSHEE 2WD 1994
      YAMAHA YFZ 350 BANSHEE 2WD 1993
      YAMAHA YFZ 350 BANSHEE 2WD 1992
      YAMAHA YFZ 350 BANSHEE 2WD 1991
      YAMAHA YFZ 350 BANSHEE 2WD 1990
      YAMAHA YFZ 350 BANSHEE 2WD 1989
      YAMAHA YFZ 350 BANSHEE 2WD 1988

      WISECO
      K136

      Specific References

      No customer reviews for the moment.

      Write your review
      WISECO Forged Piston Ø65.00mm for YAMAHA YFZ 350 BANSHEE 2WD 1988-2007
      WISECO Forged Piston Ø65.00mm for YAMAHA YFZ 350 BANSHEE 2WD 1988-2007
      WISECO Forged Piston Ø65.00mm for YAMAHA YFZ 350 BANSHEE 2WD 1988-2007
      €294.90
      Tax Included