Set of Piston Rings Ø66.75 mm 9422D 075 VERTEX for YAMAHA YFS 200 BLASTER 2WD 1990-2006

VERTEX offers this piston ring set for YAMAHA YFS 200 BLASTER 2WD 1990-2006. Rings are thin steel bands sitting in the piston grooves. They press against the cylinder wall to hold compression and scrape oil.

Why replace the rings?

The benefits:

• Regain compression and power.
• Reduce oil consumption and smoke.
• A cheap fix when piston and cylinder are still within spec.

Why choose VERTEX?

Vertex has made its pistons in Italy since 1953 and has supplied KTM’s original pistons since 1996: molybdenum-disulphide coated skirt and Japanese rings. Its two-stroke pistons are cast from an 18 % silicon alloy.

When should you replace the piston rings on your YAMAHA YFS 200 BLASTER 2WD?

Harder starting, loss of power, blue smoke, oil consumption or a knock when cold: these are the signs of a tired top end.

No manufacturer hour figure for this model. Cross-Mania guideline: compression check every 20 h in hard use and every 40 h for leisure.

Specifications and fitting tips

• Manufacturer part number: 590266750001

Cross-Mania tip: Check the ring end gap in the cylinder before fitting and respect the fitting direction (mark facing up).

Also needed with this part

• 4-stroke engine oil : MOTUL 10W50 · LIQUI MOLY 10W40 1 L

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
YAMAHA YFS 200 BLASTER 2WD 2006
YAMAHA YFS 200 BLASTER 2WD 2005
YAMAHA YFS 200 BLASTER 2WD 2004
YAMAHA YFS 200 BLASTER 2WD 2003
YAMAHA YFS 200 BLASTER 2WD 2002
YAMAHA YFS 200 BLASTER 2WD 2001
YAMAHA YFS 200 BLASTER 2WD 2000
YAMAHA YFS 200 BLASTER 2WD 1999
YAMAHA YFS 200 BLASTER 2WD 1998
YAMAHA YFS 200 BLASTER 2WD 1997
YAMAHA YFS 200 BLASTER 2WD 1996
YAMAHA YFS 200 BLASTER 2WD 1995
YAMAHA YFS 200 BLASTER 2WD 1994
YAMAHA YFS 200 BLASTER 2WD 1993
YAMAHA YFS 200 BLASTER 2WD 1992
YAMAHA YFS 200 BLASTER 2WD 1991
YAMAHA YFS 200 BLASTER 2WD 1990