• New
    Wössner Forged Piston for TM RACING ENF 250, MXF 250 2003-2011
    Wössner Forged Piston for TM RACING ENF 250, MXF 250 2003-2011
    Wössner Forged Piston for TM RACING ENF 250, MXF 250 2003-2011
    Wössner Forged Piston for TM RACING ENF 250, MXF 250 2003-2011
    Wössner Forged Piston for TM RACING ENF 250, MXF 250 2003-2011

    Wössner Forged Piston for TM RACING ENF 250, MXF 250 2003-2011

    Review (0)
    €194.90
    Tax Included
    En stock en nuestro proveedor, enviado en 2 a 5 días.

    The piston moves up and down in the cylinder to turn combustion into motion: this kit replaces it along with its rings, pin and clips.

    Quantity :
    In stock

    En stock en nuestro proveedor, enviado en 2 a 5 días.

      WOSSNER offers this piston kit for TM RACING ENF 250, MXF 250 2003-2011. The piston slides in the cylinder and takes the force of the air-fuel combustion, passing it to the connecting rod and crankshaft.

      Why choose a forged piston?

      Instead of simply being cast, a forged piston is hot-pressed under very high pressure and then machined: its metal is denser and free of air pockets.

      • Stronger when hot: it copes better with high revs, overheating and detonation.
      • Lighter for the same strength: less stress on the connecting rod and bearings.
      • Good to know: depending on the alloy, it expands a little more and is fitted with more clearance; slight noise when cold is normal.
      • Why does it cost more? Forging tools, full machining and surface treatments cost more than simple casting.

      Why choose WOSSNER?

      Wössner has forged its own pistons since 1994: Molykote-coated skirt to reduce friction and ease running-in, kit supplied complete with rings, pin and clips.

      When should you replace the piston on your TM RACING ENF 250?

      Harder starting, loss of power, blue smoke, oil consumption or a knock when cold: these are the signs of a tired top end.

      No manufacturer hour figure for this model. Cross-Mania guideline: compression check every 20 h in hard use and every 40 h for leisure.

      Specifications and fitting tips

      • Material: Aluminium
      • Piston compression: Standard
      • Oversize Letter: B
      • Rings Quantity: 3
      • Stroke: 2T
      • Forged piston
      • Manufacturer part number: 8653DB

      Cross-Mania tip: Measure the cylinder bore before ordering: the piston must match your cylinder size. Follow the manufacturer's break-in procedure and replace the top-end gaskets at the same time.

      Also needed with this part

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      TM RACING ENF 250 2011
      TM RACING ENF 250 2010
      TM RACING ENF 250 2009
      TM RACING ENF 250 2008
      TM RACING ENF 250 2007
      TM RACING ENF 250 2006
      TM RACING ENF 250 2005
      TM RACING ENF 250 2004
      TM RACING ENF 250 2003
      TM RACING MXF 250 2011
      TM RACING MXF 250 2010
      TM RACING MXF 250 2009
      TM RACING MXF 250 2008
      TM RACING MXF 250 2007
      TM RACING MXF 250 2006
      TM RACING MXF 250 2005
      TM RACING MXF 250 2004
      TM RACING MXF 250 2003

      WOSSNER
      8653DB
      1 Item

      Specific References

      No customer reviews for the moment.

      Write your review
      Wössner Forged Piston for TM RACING ENF 250, MXF 250 2003-2011
      Wössner Forged Piston for TM RACING ENF 250, MXF 250 2003-2011
      Wössner Forged Piston for TM RACING ENF 250, MXF 250 2003-2011
      €194.90
      Tax Included