• New
    PROX Casted Piston for SUZUKI LT 80 QUADRUNNER 2WD 1987-2006
    PROX Casted Piston for SUZUKI LT 80 QUADRUNNER 2WD 1987-2006
    PROX Casted Piston for SUZUKI LT 80 QUADRUNNER 2WD 1987-2006
    PROX Casted Piston for SUZUKI LT 80 QUADRUNNER 2WD 1987-2006

    PROX Casted Piston for SUZUKI LT 80 QUADRUNNER 2WD 1987-2006

    Review (0)
    €72.90
    Tax Included
    Stock del proveedor, enviado en 2 a 5 días.

    The piston moves up and down in the cylinder to turn combustion into motion: this kit replaces it along with its rings, pin and clips.

    Available in several sizes.

    Rating :
    Quantity :
    In stock

    Stock del proveedor, enviado en 2 a 5 días.

      PROX offers this piston kit for SUZUKI LT 80 QUADRUNNER 2WD 1987-2006. The piston slides in the cylinder and takes the force of the air-fuel combustion, passing it to the connecting rod and crankshaft.

      Why choose a cast piston?

      A cast piston is made by pouring liquid aluminium into a mould: it is what most manufacturers fit as standard, especially on two-strokes.

      • High-silicon alloy: it expands little, is fitted with tight clearance and stays quiet when cold.
      • Good wear resistance of the skirt and ring grooves.
      • Lower price than a forged piston, for OEM quality in normal use.
      • Limit: less tolerant of overheating and highly tuned engines.

      Why choose PROX?

      ProX has its pistons made in Japan and the USA, with Japanese rings (Riken, TP or NPR) and tolerances at least equal to OEM; most of its four-stroke pistons are forged.

      When should you replace the piston on your SUZUKI LT 80 QUADRUNNER 2WD?

      Harder starting, loss of power, blue smoke, oil consumption or a knock when cold: these are the signs of a tired top end.

      No manufacturer hour figure for this model. Cross-Mania guideline: compression check every 50 h in hard use and every 100 h for leisure.

      Specifications and fitting tips

      • Material: Aluminium
      • Piston compression: Standard

      Available in several sizes: choose the one that matches your cylinder (stamped size or measured bore).

      Cross-Mania tip: Measure the cylinder bore before ordering: the piston must match your cylinder size. Follow the manufacturer's break-in procedure and replace the top-end gaskets at the same time.

      Also needed with this part

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      SUZUKI LT 80 QUADRUNNER 2WD 2006
      SUZUKI LT 80 QUADRUNNER 2WD 2005
      SUZUKI LT 80 QUADRUNNER 2WD 2004
      SUZUKI LT 80 QUADRUNNER 2WD 2003
      SUZUKI LT 80 QUADRUNNER 2WD 2002
      SUZUKI LT 80 QUADRUNNER 2WD 2001
      SUZUKI LT 80 QUADRUNNER 2WD 2000
      SUZUKI LT 80 QUADRUNNER 2WD 1999
      SUZUKI LT 80 QUADRUNNER 2WD 1998
      SUZUKI LT 80 QUADRUNNER 2WD 1997
      SUZUKI LT 80 QUADRUNNER 2WD 1996
      SUZUKI LT 80 QUADRUNNER 2WD 1995
      SUZUKI LT 80 QUADRUNNER 2WD 1994
      SUZUKI LT 80 QUADRUNNER 2WD 1993
      SUZUKI LT 80 QUADRUNNER 2WD 1992
      SUZUKI LT 80 QUADRUNNER 2WD 1991
      SUZUKI LT 80 QUADRUNNER 2WD 1990
      SUZUKI LT 80 QUADRUNNER 2WD 1989
      SUZUKI LT 80 QUADRUNNER 2WD 1988
      SUZUKI LT 80 QUADRUNNER 2WD 1987

      PROX
      01.3180.050
      1 Items

      Specific References

      No customer reviews for the moment.

      Write your review
      PROX Casted Piston for SUZUKI LT 80 QUADRUNNER 2WD 1987-2006
      PROX Casted Piston for SUZUKI LT 80 QUADRUNNER 2WD 1987-2006
      PROX Casted Piston for SUZUKI LT 80 QUADRUNNER 2WD 1987-2006
      €72.90
      Tax Included