• New
    PROX Carburettor Rebuild Kit for HONDA XR 250 1981-1995
    PROX Carburettor Rebuild Kit for HONDA XR 250 1981-1995

    PROX Carburettor Rebuild Kit for HONDA XR 250 1981-1995

    Review (0)
    €42.90
    Tax Included
    Disponible en nuestro proveedor, enviado en 10 a 15 días.

    PROX carburettor rebuild kit for HONDA XR 250 from 1981 to 1995. NBR O-rings that resist the ethanol in today's fuels.

    Quantity :
    In stock

    Disponible en nuestro proveedor, enviado en 10 a 15 días.

      The PROX 55.10545 carburettor rebuild kit is designed for HONDA XR 250 from 1981 to 1995. Over time and with today's fuels, the carburettor's seals harden and the float needle wears: the carburettor leaks, the float bowl overflows and the carburation becomes unstable. This kit brings the carburettor back to its original condition.

      Key features

      • NBR O-rings that resist the ethanol in today's fuels.
      • Float bowl gasket in Interface material instead of the stock paper gasket, depending on the model.
      • Jets in stock sizes, needle and seat depending on the model, fuel screw and small hardware.

      Specifications

      • Brand: PROX
      • Manufacturer part number: 55.10545
      • Weight: 40 g
      • Engine: 4-stroke

      When to replace it?

      • Fuel running out of the overflow, float bowl overflowing.
      • Unstable idle, hard starting, carburation that keeps changing.
      • Hardened seals or a seeping float bowl.

      When bringing a bike back into service after it has stood unused for a long time, during a full carburettor clean, or as soon as a leak appears.

      Fitting tips

      1. Strip and clean the carburettor (cleaning bath, compressed air), noting the original settings: float height, number of turns on the fuel screw.
      2. Replace all the gaskets and O-rings in the kit, without reusing the old ones.
      3. Set the float height according to the manual.
      4. Reassemble, then set the idle and the fuel screw with the engine warm; check the colour of the spark plug after a few rides.

      Why PROX?

      Founded in 1975 and based near Amsterdam, ProX specialises in engine and clutch wear parts for off-road bikes. The brand has most of its range made in Japan, by OEM suppliers, for quality on a par with the original parts.

      Spare parts and items to plan

      Frequently asked questions

      Does the kit change the jetting?
      No: the jets supplied are the original sizes for your bike.

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      HONDA XR 250 1995
      HONDA XR 250 1994
      HONDA XR 250 1993
      HONDA XR 250 1992
      HONDA XR 250 1991
      HONDA XR 250 1990
      HONDA XR 250 1989
      HONDA XR 250 1988
      HONDA XR 250 1987
      HONDA XR 250 1986
      HONDA XR 250 1985
      HONDA XR 250 1984
      HONDA XR 250 1983
      HONDA XR 250 1982
      HONDA XR 250 1981

      PROX
      55.10545
      5 Items

      Specific References

      No customer reviews for the moment.

      Write your review
      PROX Carburettor Rebuild Kit for HONDA XR 250 1981-1995
      PROX Carburettor Rebuild Kit for HONDA XR 250 1981-1995
      PROX Carburettor Rebuild Kit for HONDA XR 250 1981-1995
      €42.90
      Tax Included