• New
    PIVOT WORKS Upgrade Rear Wheel Bearing Kit for YAMAHA BW 350, TW 200 1987-2016
    PIVOT WORKS Upgrade Rear Wheel Bearing Kit for YAMAHA BW 350, TW 200 1987-2016

    PIVOT WORKS Upgrade Rear Wheel Bearing Kit for YAMAHA BW 350, TW 200 1987-2016

    Review (0)
    €46.10
    Tax Included
    Bajo pedido, plazo confirmado en 24 horas.

    Rear wheel bearings let the wheel spin freely on its axle and take the loads of the drive chain.

    PIVOT WORKS Upgrade rear wheel bearing kit for YAMAHA BW 350, TW 200 from 1987 to 2016.

    Quantity :
    On order

    Bajo pedido, plazo confirmado en 24 horas.

      On YAMAHA BW 350, TW 200 from 1987 to 2016, the PIVOT WORKS Upgrade PWRWKY37200 rear wheel bearing kit fits in place of the original part. A wheel with play, or one that turns roughly, damages the brakes, the drive and the handling. This kit groups the bearings and seals needed to rebuild the rear wheel, with the spacers when the model needs them.

      Specifications

      • Brand: PIVOT WORKS
      • Manufacturer part number: PWRWKY37200

      When to replace it?

      • Side play when you rock the wheel top and bottom.
      • Wheel turning roughly or unevenly, bearing noise.
      • Damaged seals, rust or water in the hub.

      Check the wheels for play every time you wash the bike. As a Cross-Mania guideline: replace every 40 to 60 hours of racing or muddy riding, about once a year for leisure riding, and straight away as soon as play appears.

      Fitting tips

      1. Remove the old bearings with a puller or a bearing drift, without damaging the hub bore.
      2. Clean the hub, put the new bearings in the freezer and press them in on the outer race only.
      3. Refit the central spacer between the bearings: without it, the bearings get crushed when the axle is tightened.
      4. Fit the seals squarely, lips packed with grease.
      5. Grease the wheel axle and tighten it to the manufacturer's torque, then check that the wheel turns freely.

      Why PIVOT WORKS?

      Pivot Works specialises in chassis rebuild kits for off-road bikes and quads: bearings, seals, bushings and spacers grouped by model. The brand claims original-equipment quality, durability and fit, and since 2012 has offered a lifetime replacement of its kits in case of failure (once per kit).

      Spare parts and items to plan

      Frequently asked questions

      What does the kit contain?
      The bearings and oil seals of the rear wheel, plus the spacers or collars when the model needs them. Compare with the photo and your original parts if in doubt.

      Should both bearings be changed?
      Yes: they wear together. Changing only one bearing brings the play back very quickly.

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      YAMAHA BW 350 1988
      YAMAHA BW 350 1987
      YAMAHA TW 200 2016
      YAMAHA TW 200 2015
      YAMAHA TW 200 2014
      YAMAHA TW 200 2013
      YAMAHA TW 200 2012
      YAMAHA TW 200 2011
      YAMAHA TW 200 2010
      YAMAHA TW 200 2009
      YAMAHA TW 200 2008
      YAMAHA TW 200 2007
      YAMAHA TW 200 2006
      YAMAHA TW 200 2005
      YAMAHA TW 200 2004
      YAMAHA TW 200 2003
      YAMAHA TW 200 2002
      YAMAHA TW 200 2001
      YAMAHA TW 200 2000
      YAMAHA TW 200 1999
      YAMAHA TW 200 1998
      YAMAHA TW 200 1997
      YAMAHA TW 200 1996
      YAMAHA TW 200 1995
      YAMAHA TW 200 1994
      YAMAHA TW 200 1993
      YAMAHA TW 200 1992
      YAMAHA TW 200 1991
      YAMAHA TW 200 1990
      YAMAHA TW 200 1989
      YAMAHA TW 200 1988
      YAMAHA TW 200 1987

      PIVOT WORKS
      PWRWKY37200

      Specific References

      No customer reviews for the moment.

      Write your review
      PIVOT WORKS Upgrade Rear Wheel Bearing Kit for YAMAHA BW 350, TW 200 1987-2016
      PIVOT WORKS Upgrade Rear Wheel Bearing Kit for YAMAHA BW 350, TW 200 1987-2016
      PIVOT WORKS Upgrade Rear Wheel Bearing Kit for YAMAHA BW 350, TW 200 1987-2016
      €46.10
      Tax Included