INNTECK Upper Shock Bearing Kit for TM RACING EN 125, EN 250, EN 300, MX 125, MX 250, MX 300 2005-2006

On TM RACING EN 125, EN 250, EN 300, MX 125, MX 250, MX 300 from 2005 to 2006, the INNTECK WY-29-5058 shock bearing kit fits in place of the original part. The shock is mounted at both ends on bearings or spherical bearings. Seized or worn, they create play and hold the shock back: the rear end becomes harsh and the suspension loses its sensitivity.

Specifications

• Brand: INNTECK
• Manufacturer part number: WY-29-5058

When to replace it?

• Play at the rear when you lift the wheel.
• Spherical bearing or bearing that binds, clunking noise at the rear.
• Rusty bearing or marked sleeve at disassembly.

Check these bearings every time you remove the shock and at the same time as the linkage. Check whether it is the upper or the lower mount (given in the name).

Fitting tips

1. Remove the shock as per the manual.
2. Press out the old bearing or spherical bearing and clean the mounting eye.
3. Press in the new bearing, with the seals and sleeves packed with waterproof grease.
4. Refit the shock and tighten the pivot bolts to the manual's torque.

Spare parts and items to plan

• Linkage bearings : PROX 26.450061 · PROX 26.450057
• Grease : MOTUL 400 g

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
TM RACING EN 125 2006
TM RACING EN 125 2005
TM RACING EN 250 2006
TM RACING EN 250 2005
TM RACING EN 300 2006
TM RACING EN 300 2005
TM RACING MX 125 2006
TM RACING MX 125 2005
TM RACING MX 250 2006
TM RACING MX 250 2005
TM RACING MX 300 2006
TM RACING MX 300 2005