INNTECK Upper Shock Bearing Kit for TM RACING EN 125, EN 250, MX 85, MX 125, MX 250 1996-2009

The INNTECK WY-29-5057 shock bearing kit is designed for TM RACING EN 125, EN 250, MX 85, MX 125, MX 250 from 1996 to 2009. The shock is mounted at both ends on bearings or spherical bearings. Seized or worn, they create play and hold the shock back: the rear end becomes harsh and the suspension loses its sensitivity.

Specifications

• Brand: INNTECK
• Manufacturer part number: WY-29-5057

When to replace it?

• Play at the rear when you lift the wheel.
• Spherical bearing or bearing that binds, clunking noise at the rear.
• Rusty bearing or marked sleeve at disassembly.

Check these bearings every time you remove the shock and at the same time as the linkage. Check whether it is the upper or the lower mount (given in the name).

Fitting tips

1. Remove the shock as per the manual.
2. Press out the old bearing or spherical bearing and clean the mounting eye.
3. Press in the new bearing, with the seals and sleeves packed with waterproof grease.
4. Refit the shock and tighten the pivot bolts to the manual's torque.

Spare parts and items to plan

• Linkage bearings : PROX 26.450061 · PROX 26.450057
• Grease : MOTUL 400 g

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
TM RACING EN 125 2004
TM RACING EN 125 2003
TM RACING EN 125 2002
TM RACING EN 125 1997
TM RACING EN 125 1996
TM RACING EN 250 2004
TM RACING EN 250 2003
TM RACING EN 250 2002
TM RACING MX 85 2009
TM RACING MX 85 2008
TM RACING MX 85 2007
TM RACING MX 85 2006
TM RACING MX 125 2004
TM RACING MX 125 2003
TM RACING MX 125 2002
TM RACING MX 125 1997
TM RACING MX 125 1996
TM RACING MX 250 2004
TM RACING MX 250 2003
TM RACING MX 250 2002
TM RACING MX 250 1997
TM RACING MX 250 1996