• New
    METEOR Piston Kit ref. PC2110CD for KTM SX 50, HUSQVARNA TC 50 and GAS GAS MC 50 2009-2027
    METEOR Piston Kit ref. PC2110CD for KTM SX 50, HUSQVARNA TC 50 and GAS GAS MC 50 2009-2027

    METEOR Piston Kit ref. PC2110CD for KTM SX 50, HUSQVARNA TC 50 and GAS GAS MC 50 2009-2027

    Review (0)
    €49.90
    Tax Included
    Disponible en nuestro proveedor, enviado en 10 a 15 días.

    METEOR piston kit Ø 39.47 mm for KTM SX 50, HUSQVARNA TC 50 and GAS GAS MC 50 from 2009 to 2027. Italian piston manufacturer since 1952.

    Quantity :
    In stock

    Disponible en nuestro proveedor, enviado en 10 a 15 días.

      The METEOR PC2110CD piston kit (Ø 39.47 mm) is designed for KTM SX 50, HUSQVARNA TC 50 and GAS GAS MC 50 from 2009 to 2027. The piston takes the pressure of every combustion and passes it on to the connecting rod, thousands of times a minute. Over the hours it wears, its rings stop sealing properly and the engine loses compression: it starts less easily, pulls less hard and runs hotter.

      Key features

      • Italian piston manufacturer since 1952.
      • Complete kit: piston, ring(s), pin and circlips.

      Specifications

      • Brand: METEOR
      • Manufacturer part number: PC2110CD
      • Piston diameter: 39.47 mm
      • Engine: 2-stroke

      When to replace it?

      • Loss of power, sluggish pick-up, harder starting: compression is dropping.
      • Piston slap on a cold engine, getting more and more noticeable.
      • On teardown: vertical scoring on the skirt, stuck or worn rings, thick carbon on the crown.

      Replace the piston as set out in your bike's service manual, sooner if you race, and straight away as soon as these symptoms appear. As a Cross-Mania guideline, plan for a new piston every 15 to 30 hours of engine running depending on whether you race or ride for fun. Always measure the cylinder at the same time: a new piston in an oval cylinder won't last.

      Fitting tips

      1. Clean the cylinder and check it: diameter, ovality, taper and condition of the bore coating.
      2. Check the end gap of each ring in the cylinder against the figures in the manual or the manufacturer's instructions.
      3. Fit the rings with the mark facing up and each gap correctly located on its locating pin.
      4. Check the small-end needle bearing and the pin: at the slightest play, tight spot or marked needle, replace the bearing.
      5. Fit the piston with its arrow pointing to the exhaust side, oil the pin and the small end, then fit the circlips without distorting them, gap opposite the notch. A circlip that has been taken out is replaced with new piston pin circlips, never refitted.
      6. Reassemble with a new top end gasket kit and tighten the cylinder head in a criss-cross pattern to the manufacturer's torque.
      7. Refill the coolant and fit a new spark plug.
      8. Break the engine in: warm it up gently, vary the revs and avoid sustained full throttle for the first hour.

      Why METEOR?

      A piston manufacturer since 1952, Italy's Meteor has supplied original equipment to manufacturers such as Piaggio and Innocenti. Its Meteor Racing division designs pistons for racing engines, both two-stroke and four-stroke.

      Spare parts and items to plan

      Frequently asked questions

      Does the kit include the gaskets?
      No: the kit contains the piston, rings, pin and circlips. Add a top end gasket kit, because a head or base gasket can never be reused.

      Can I replace just the rings later?
      Yes, as long as the piston and cylinder are still within tolerance. Replacement rings can be ordered on their own, as can the piston pin and the circlips.

      Should I replace the small-end needle bearing?
      It isn't included. Check it at every piston change and replace the needle bearing at the slightest play or tight spot.

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      GAS GAS MC 50 2027
      GAS GAS MC 50 2026
      GAS GAS MC 50 2025
      GAS GAS MC 50 2024
      GAS GAS MC 50 2023
      GAS GAS MC 50 2022
      GAS GAS MC 50 2021
      HUSQVARNA TC 50 2027
      HUSQVARNA TC 50 2026
      HUSQVARNA TC 50 2025
      HUSQVARNA TC 50 2024
      HUSQVARNA TC 50 2023
      HUSQVARNA TC 50 2022
      HUSQVARNA TC 50 2021
      HUSQVARNA TC 50 2020
      HUSQVARNA TC 50 2019
      HUSQVARNA TC 50 2018
      HUSQVARNA TC 50 2017
      KTM SX 50 2026
      KTM SX 50 2025
      KTM SX 50 2024
      KTM SX 50 2023
      KTM SX 50 2022
      KTM SX 50 2021
      KTM SX 50 2020
      KTM SX 50 2019
      KTM SX 50 2018
      KTM SX 50 2017
      KTM SX 50 2016
      KTM SX 50 2015
      KTM SX 50 2014
      KTM SX 50 2013
      KTM SX 50 2012
      KTM SX 50 2011
      KTM SX 50 2010
      KTM SX 50 2009

      METEOR
      PC2110CD
      5 Items

      Specific References

      No customer reviews for the moment.

      Write your review
      METEOR Piston Kit ref. PC2110CD for KTM SX 50, HUSQVARNA TC 50 and GAS GAS MC 50 2009-2027
      METEOR Piston Kit ref. PC2110CD for KTM SX 50, HUSQVARNA TC 50 and GAS GAS MC 50 2009-2027
      METEOR Piston Kit ref. PC2110CD for KTM SX 50, HUSQVARNA TC 50 and GAS GAS MC 50 2009-2027
      €49.90
      Tax Included