• New
    Wössner Forged Piston for KTM GS 600, MX 600 1988-1992
    Wössner Forged Piston for KTM GS 600, MX 600 1988-1992
    Wössner Forged Piston for KTM GS 600, MX 600 1988-1992
    Wössner Forged Piston for KTM GS 600, MX 600 1988-1992
    Wössner Forged Piston for KTM GS 600, MX 600 1988-1992
    Wössner Forged Piston for KTM GS 600, MX 600 1988-1992
    Wössner Forged Piston for KTM GS 600, MX 600 1988-1992
    Wössner Forged Piston for KTM GS 600, MX 600 1988-1992
    Wössner Forged Piston for KTM GS 600, MX 600 1988-1992

    Wössner Forged Piston for KTM GS 600, MX 600 1988-1992

    Review (0)
    €235.90
    Tax Included
    Bajo pedido, plazo confirmado en 24 horas.

    The piston moves up and down in the cylinder to turn combustion into motion: this kit replaces it along with its rings, pin and clips.

    Available in several sizes.

    Rating :
    Quantity :
    On order

    Bajo pedido, plazo confirmado en 24 horas.

      WOSSNER offers this piston kit for KTM GS 600, MX 600 1988-1992. The piston slides in the cylinder and takes the force of the air-fuel combustion, passing it to the connecting rod and crankshaft.

      Why choose a forged piston?

      Instead of simply being cast, a forged piston is hot-pressed under very high pressure and then machined: its metal is denser and free of air pockets.

      • Stronger when hot: it copes better with high revs, overheating and detonation.
      • Lighter for the same strength: less stress on the connecting rod and bearings.
      • Good to know: depending on the alloy, it expands a little more and is fitted with more clearance; slight noise when cold is normal.
      • Why does it cost more? Forging tools, full machining and surface treatments cost more than simple casting.

      Why choose WOSSNER?

      Wössner has forged its own pistons since 1994: Molykote-coated skirt to reduce friction and ease running-in, kit supplied complete with rings, pin and clips.

      When should you replace the piston on your KTM GS 600?

      Harder starting, loss of power, blue smoke, oil consumption or a knock when cold: these are the signs of a tired top end.

      No manufacturer hour figure for this model. Cross-Mania guideline: compression check every 20 h in hard use and every 40 h for leisure.

      Specifications and fitting tips

      • Material: Aluminium
      • Piston compression: Standard
      • Rings Quantity: 3
      • Stroke: 4T
      • Forged piston
      • Anti friction coated skirt

      Available in several sizes: choose the one that matches your cylinder (stamped size or measured bore). Diameters: A = 94.94 mm, B = 94.95 mm.

      Cross-Mania tip: Measure the cylinder bore before ordering: the piston must match your cylinder size. Follow the manufacturer's break-in procedure and replace the top-end gaskets at the same time.

      Also needed with this part

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      KTM GS 600 1992
      KTM GS 600 1991
      KTM GS 600 1990
      KTM GS 600 1989
      KTM GS 600 1988
      KTM MX 600 1992
      KTM MX 600 1991
      KTM MX 600 1990
      KTM MX 600 1989
      KTM MX 600 1988

      WOSSNER
      8520DA

      Specific References

      No customer reviews for the moment.

      Write your review
      Wössner Forged Piston for KTM GS 600, MX 600 1988-1992
      Wössner Forged Piston for KTM GS 600, MX 600 1988-1992
      Wössner Forged Piston for KTM GS 600, MX 600 1988-1992
      €235.90
      Tax Included