- New









The piston moves up and down in the cylinder to turn combustion into motion: this kit replaces it along with its rings, pin and clips.
Available in several sizes.
WOSSNER offers this piston kit for KTM EGS 125, EXC 125, EXC 125 MARZOCCHI/OHLINS, SX 125 1994-2000. The piston slides in the cylinder and takes the force of the air-fuel combustion, passing it to the connecting rod and crankshaft.
Instead of simply being cast, a forged piston is hot-pressed under very high pressure and then machined: its metal is denser and free of air pockets.
Wössner has forged its own pistons since 1994: Molykote-coated skirt to reduce friction and ease running-in, kit supplied complete with rings, pin and clips.
Harder starting, loss of power, blue smoke, oil consumption or a knock when cold: these are the signs of a tired top end.
No manufacturer hour figure for this model. Cross-Mania guideline: compression check every 20 h in hard use and every 40 h for leisure.
Available in several sizes: choose the one that matches your cylinder (stamped size or measured bore). Diameters: A = 54.19 mm, B = 54.20 mm.
Cross-Mania tip: Measure the cylinder bore before ordering: the piston must match your cylinder size. Follow the manufacturer's break-in procedure and replace the top-end gaskets at the same time.
Check the exact model and year of your bike in the list below before ordering.
Fits:
KTM EGS 125 1999
KTM EGS 125 1998
KTM EGS 125 1997
KTM EGS 125 1996
KTM EXC 125 2000
KTM EXC 125 1999
KTM EXC 125 1998
KTM EXC 125 1997
KTM EXC 125 1996
KTM EXC 125 1995
KTM EXC 125 1994
KTM EXC 125 MARZOCCHI/OHLINS 1997
KTM EXC 125 MARZOCCHI/OHLINS 1996
KTM EXC 125 MARZOCCHI/OHLINS 1995
KTM EXC 125 MARZOCCHI/OHLINS 1994
KTM SX 125 2000
KTM SX 125 1999
KTM SX 125 1998
KTM SX 125 1997
KTM SX 125 1996
KTM SX 125 1995
KTM SX 125 1994
Click on your bike to see all compatible parts.
No customer reviews for the moment.