• New
    WOSSNER piston kit for KTM SX 150 from 2016 to 2019
    WOSSNER piston kit for KTM SX 150 from 2016 to 2019

    WOSSNER piston kit for KTM SX 150 from 2016 to 2019

    Review (0)
    €130.90
    Tax Included
    Stock del proveedor, enviado en 2 a 5 días.

    The piston moves up and down in the cylinder to turn combustion into motion: this kit replaces it along with its rings, pin and clips.

    Quantity :
    In stock

    Stock del proveedor, enviado en 2 a 5 días.

      WOSSNER offers this piston kit for KTM SX 150 from 2016 to 2019. The piston slides in the cylinder and takes the force of the air-fuel combustion, passing it to the connecting rod and crankshaft.

      Why choose a forged piston?

      Instead of simply being cast, a forged piston is hot-pressed under very high pressure and then machined: its metal is denser and free of air pockets.

      • Stronger when hot: it copes better with high revs, overheating and detonation.
      • Lighter for the same strength: less stress on the connecting rod and bearings.
      • Good to know: depending on the alloy, it expands a little more and is fitted with more clearance; slight noise when cold is normal.
      • Why does it cost more? Forging tools, full machining and surface treatments cost more than simple casting.

      Why choose WOSSNER?

      Wössner has forged its own pistons since 1994: Molykote-coated skirt to reduce friction and ease running-in, kit supplied complete with rings, pin and clips.

      When should you replace the piston on your KTM SX 150?

      Harder starting, loss of power, blue smoke, oil consumption or a knock when cold: these are the signs of a tired top end.

      Recommended hours for a top-end rebuild (manufacturer recommendation for the KTM SX, Husqvarna TC 125-300 2017-2022):

      • Racing: every 20 h.
      • Leisure: no KTM figure; Cross-Mania guideline: compression check at around 40 h.
      • Riding in sand: every 10 h.

      Specifications and fitting tips

      • Contents: Piston #8299DA, Ring Set #RSV5800, Wrist Pin #WP032, Retaining Clips #CW15
      • Bore: 58.00 mm
      • Oversize: Standard
      • Displacement: 143 cm³
      • Stroke: 54.50 mm
      • Piston material: Aluminium alloy, Forged
      • Pistons feature a high-quality permanent skirt coating to reduce friction and noise and improve performance

      Cross-Mania tip: Measure the cylinder bore before ordering: the piston must match your cylinder size. Follow the manufacturer's break-in procedure and replace the top-end gaskets at the same time.

      Also needed with this part

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      KTM SX 150 2019
      KTM SX 150 2018
      KTM SX 150 2017
      KTM SX 150 2016

      WOSSNER
      8299DA
      5 Items

      Specific References

      Click on your bike to see all compatible parts.

      No customer reviews for the moment.

      Write your review
      WOSSNER piston kit for KTM SX 150 from 2016 to 2019
      WOSSNER piston kit for KTM SX 150 from 2016 to 2019
      WOSSNER piston kit for KTM SX 150 from 2016 to 2019
      €130.90
      Tax Included