• New
    WOSSNER piston kit for KAWASAKI KX 80 from 1988 to 2000 - 8197DA
    WOSSNER piston kit for KAWASAKI KX 80 from 1988 to 2000 - 8197DA

    WOSSNER piston kit for KAWASAKI KX 80 from 1988 to 2000 - 8197DA

    Review (0)
    €100.90
    Tax Included
    En stock en nuestro proveedor, enviado en 2 a 5 días.

    The piston moves up and down in the cylinder to turn combustion into motion: this kit replaces it along with its rings, pin and clips.

    Rating :
    Quantity :
    In stock

    En stock en nuestro proveedor, enviado en 2 a 5 días.

      WOSSNER offers this piston kit for KAWASAKI KX 80 from 1988 to 2000. The piston slides in the cylinder and takes the force of the air-fuel combustion, passing it to the connecting rod and crankshaft.

      Why choose a forged piston?

      Instead of simply being cast, a forged piston is hot-pressed under very high pressure and then machined: its metal is denser and free of air pockets.

      • Stronger when hot: it copes better with high revs, overheating and detonation.
      • Lighter for the same strength: less stress on the connecting rod and bearings.
      • Good to know: depending on the alloy, it expands a little more and is fitted with more clearance; slight noise when cold is normal.
      • Why does it cost more? Forging tools, full machining and surface treatments cost more than simple casting.

      Why choose WOSSNER?

      Wössner has forged its own pistons since 1994: Molykote-coated skirt to reduce friction and ease running-in, kit supplied complete with rings, pin and clips.

      When should you replace the piston on your KAWASAKI KX 80 17/14?

      Harder starting, loss of power, blue smoke, oil consumption or a knock when cold: these are the signs of a tired top end.

      No manufacturer hour figure for this model. Cross-Mania guideline: compression check every 20 h in hard use and every 40 h for leisure.

      Specifications and fitting tips

      • Contents: Piston #8197DA, Ring Set #RSB4800, Wrist Pin #WP058, Retaining Clips #CW14
      • Bore: 48.00 mm
      • Oversize: Standard
      • Displacement: 79 cm³
      • Stroke: 45.80 mm
      • Piston material: Aluminium alloy, Forged
      • Pistons feature a high-quality permanent skirt coating to reduce friction and noise and improve performance

      Cross-Mania tip: Measure the cylinder bore before ordering: the piston must match your cylinder size. Follow the manufacturer's break-in procedure and replace the top-end gaskets at the same time.

      Also needed with this part

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      KAWASAKI KX 80 2000
      KAWASAKI KX 80 1999
      KAWASAKI KX 80 1998
      KAWASAKI KX 80 1997
      KAWASAKI KX 80 1996
      KAWASAKI KX 80 1995
      KAWASAKI KX 80 1994
      KAWASAKI KX 80 1993
      KAWASAKI KX 80 1992
      KAWASAKI KX 80 1991
      KAWASAKI KX 80 1990
      KAWASAKI KX 80 1989
      KAWASAKI KX 80 1988

      WOSSNER
      8197DA
      2 Items

      Specific References

      No customer reviews for the moment.

      Write your review
      WOSSNER piston kit for KAWASAKI KX 80 from 1988 to 2000 - 8197DA
      WOSSNER piston kit for KAWASAKI KX 80 from 1988 to 2000 - 8197DA
      WOSSNER piston kit for KAWASAKI KX 80 from 1988 to 2000 - 8197DA
      €100.90
      Tax Included