• New
    ALL BALLS Crankshaft Bearing & Oil Seal Kit for YAMAHA YFZ 350 BANSHEE 2WD 1988-2011
    ALL BALLS Crankshaft Bearing & Oil Seal Kit for YAMAHA YFZ 350 BANSHEE 2WD 1988-2011

    ALL BALLS Crankshaft Bearing & Oil Seal Kit for YAMAHA YFZ 350 BANSHEE 2WD 1988-2011

    Review (0)
    €98.90
    Tax Included
    En stock en nuestro proveedor, enviado en 2 a 5 días.

    The engine’s bearings and oil seals in one kit for a bottom-end rebuild.

    Quantity :
    In stock

    En stock en nuestro proveedor, enviado en 2 a 5 días.

      ALL BALLS offers this engine bearing and seal kit for YAMAHA YFZ 350 BANSHEE 2WD 1988-2011. The crankshaft and gearbox shafts spin on bearings in the cases; oil seals keep the oil in around the shafts.

      What is this bearing made of?

      Races and balls (or rollers) in hardened chrome steel, 100Cr6 type: a very hard steel that withstands the fatigue of millions of engine revolutions.

      • Open bearing: unsealed, it is lubricated and cooled by the engine oil; clean oil is its best protection.
      • C3 / C4 internal clearance: slightly more clearance than normal for a hot engine’s expansion; always refit the original clearance.
      • Limit: it dislikes dust and old oil; running short of oil destroys it within minutes.

      Why choose ALL BALLS?

      Complete All Balls kits: low-friction bearings and steel-spring nitrile seals, everything you need in one box.

      When should you replace the bearings on your YAMAHA YFZ 350 BANSHEE 2WD?

      Unusual vibration, a deep knock that follows engine speed or play in the con-rod: the bottom end needs a rebuild.

      The manufacturer publishes no hour interval for this model: have the con-rod play checked at every piston change. Cross-Mania guideline: rebuild the bottom end every 2 to 3 top-end rebuilds.

      Specifications and fitting tips

      • Crankshaft bearing + seal kit
      • Includes all of the bearings and seals needed for the procedure
      • Manufacturer part number: 24-1034

      Cross-Mania tip: Heat the cases to remove and fit the bearings without forcing them, and replace the oil seals at the same time.

      Also needed with this part

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      YAMAHA YFZ 350 BANSHEE 2WD 2011
      YAMAHA YFZ 350 BANSHEE 2WD 2010
      YAMAHA YFZ 350 BANSHEE 2WD 2009
      YAMAHA YFZ 350 BANSHEE 2WD 2008
      YAMAHA YFZ 350 BANSHEE 2WD 2007
      YAMAHA YFZ 350 BANSHEE 2WD 2006
      YAMAHA YFZ 350 BANSHEE 2WD 2005
      YAMAHA YFZ 350 BANSHEE 2WD 2004
      YAMAHA YFZ 350 BANSHEE 2WD 2003
      YAMAHA YFZ 350 BANSHEE 2WD 2002
      YAMAHA YFZ 350 BANSHEE 2WD 2001
      YAMAHA YFZ 350 BANSHEE 2WD 2000
      YAMAHA YFZ 350 BANSHEE 2WD 1999
      YAMAHA YFZ 350 BANSHEE 2WD 1998
      YAMAHA YFZ 350 BANSHEE 2WD 1997
      YAMAHA YFZ 350 BANSHEE 2WD 1996
      YAMAHA YFZ 350 BANSHEE 2WD 1995
      YAMAHA YFZ 350 BANSHEE 2WD 1994
      YAMAHA YFZ 350 BANSHEE 2WD 1993
      YAMAHA YFZ 350 BANSHEE 2WD 1992
      YAMAHA YFZ 350 BANSHEE 2WD 1991
      YAMAHA YFZ 350 BANSHEE 2WD 1990
      YAMAHA YFZ 350 BANSHEE 2WD 1989
      YAMAHA YFZ 350 BANSHEE 2WD 1988

      ALL BALLS
      24-1034
      2 Items

      Specific References

      No customer reviews for the moment.

      Write your review
      ALL BALLS Crankshaft Bearing & Oil Seal Kit for YAMAHA YFZ 350 BANSHEE 2WD 1988-2011
      ALL BALLS Crankshaft Bearing & Oil Seal Kit for YAMAHA YFZ 350 BANSHEE 2WD 1988-2011
      ALL BALLS Crankshaft Bearing & Oil Seal Kit for YAMAHA YFZ 350 BANSHEE 2WD 1988-2011
      €98.90
      Tax Included