- New
HOT RODS Crankshaft Bearing & Oil Seal Kit for YAMAHA YFS 200 BLASTER 2WD 1990-2007
€99.90
Tax Included
The engine’s bearings and oil seals in one kit for a bottom-end rebuild.
HOT RODS offers this engine bearing and seal kit for YAMAHA YFS 200 BLASTER 2WD 1990-2007. The crankshaft and gearbox shafts spin on bearings in the cases; oil seals keep the oil in around the shafts.
What is this bearing made of?
Races and balls (or rollers) in hardened chrome steel, 100Cr6 type: a very hard steel that withstands the fatigue of millions of engine revolutions.
- Open bearing: unsealed, it is lubricated and cooled by the engine oil; clean oil is its best protection.
- C3 / C4 internal clearance: slightly more clearance than normal for a hot engine’s expansion; always refit the original clearance.
- Limit: it dislikes dust and old oil; running short of oil destroys it within minutes.
Why choose HOT RODS?
Hot Rods, the bottom-end specialist since 1993: crankshafts, rods, bearings and seals for a complete rebuild.
When should you replace the bearings on your YAMAHA YFS 200 BLASTER 2WD?
Unusual vibration, a deep knock that follows engine speed or play in the con-rod: the bottom end needs a rebuild.
The manufacturer publishes no hour interval for this model: have the con-rod play checked at every piston change. Cross-Mania guideline: rebuild the bottom end every 2 to 3 top-end rebuilds.
Specifications and fitting tips
- Manufacturer part number: K017
Cross-Mania tip: Heat the cases to remove and fit the bearings without forcing them, and replace the oil seals at the same time.
Also needed with this part
- 4-stroke engine oil : MOTUL 10W50 · LIQUI MOLY 10W40 1 L
Compatibility
Check the exact model and year of your bike in the list below before ordering.
Fits:
YAMAHA YFS 200 BLASTER 2WD 2007
YAMAHA YFS 200 BLASTER 2WD 2006
YAMAHA YFS 200 BLASTER 2WD 2005
YAMAHA YFS 200 BLASTER 2WD 2004
YAMAHA YFS 200 BLASTER 2WD 2003
YAMAHA YFS 200 BLASTER 2WD 2002
YAMAHA YFS 200 BLASTER 2WD 2001
YAMAHA YFS 200 BLASTER 2WD 2000
YAMAHA YFS 200 BLASTER 2WD 1999
YAMAHA YFS 200 BLASTER 2WD 1998
YAMAHA YFS 200 BLASTER 2WD 1997
YAMAHA YFS 200 BLASTER 2WD 1996
YAMAHA YFS 200 BLASTER 2WD 1995
YAMAHA YFS 200 BLASTER 2WD 1994
YAMAHA YFS 200 BLASTER 2WD 1993
YAMAHA YFS 200 BLASTER 2WD 1992
YAMAHA YFS 200 BLASTER 2WD 1991
YAMAHA YFS 200 BLASTER 2WD 1990
K017
9 Items
Specific References
No customer reviews for the moment.
The engine’s bearings and oil seals in one kit for a bottom-end rebuild.
HOT RODS Crankshaft Bearing & Oil Seal Kit for YAMAHA YFS 200 BLASTER 2WD 1990-2007
€99.90
Tax Included