• New
    PIVOT WORKS Swingarm Bearing Kit for KAWASAKI KXF 450 2016
    PIVOT WORKS Swingarm Bearing Kit for KAWASAKI KXF 450 2016

    PIVOT WORKS Swingarm Bearing Kit for KAWASAKI KXF 450 2016

    Review (0)
    €108.80
    Tax Included
    On order, lead time confirmed within 24 hours.

    PIVOT WORKS swingarm bearing kit for KAWASAKI KXF 450 2016.

    Quantity :
    On order

    On order, lead time confirmed within 24 hours.

      On KAWASAKI KXF 450 2016, the PIVOT WORKS PWSAKK21000 swingarm bearing kit fits in place of the original part. The swingarm pivots on the frame on its bearings. A pivot with play makes the rear vague and runs the chain out of line: this kit rebuilds the swingarm pivot.

      Specifications

      • Brand: PIVOT WORKS
      • Manufacturer part number: PWSAKK21000

      When to replace it?

      • Play when you lift the rear wheel, bike on a stand.
      • Suspension that creaks, sticks or reacts less well over small bumps.
      • Rusty needles, torn seals or marked bushings on teardown.

      Your bike's service manual gives the exact interval. As a Cross-Mania guideline: strip, clean and grease every 20 to 30 hours of racing or after very muddy rides, once a season for leisure riding; replace as soon as play or a tight spot appears.

      Fitting tips

      1. Note the position of each part as you strip it, side by side.
      2. Press the needle bearings out, or use a suitable puller, without making the bores oval.
      3. Press the new bearings in squarely, to the same depth as the old ones.
      4. Pack bearings, bushings and seal lips with grease before reassembly.
      5. Tighten the bolts to the manufacturer's torque and check that the suspension moves freely, without play.

      Why PIVOT WORKS?

      Pivot Works specialises in chassis rebuild kits for off-road bikes and quads: bearings, seals, bushings and spacers grouped by model. The brand claims original-equipment quality, durability and fit, and since 2012 has offered a lifetime replacement of its kits in case of failure (once per kit).

      Spare parts and items to plan

      Frequently asked questions

      Are the bolts supplied?
      The kit contains the model's bearings, seals and wear bushings; the bolts and hardware stay original if they are not marked. Compare with the photo if in doubt.

      Which grease should I use?
      A thick, water-resistant grease, applied generously: it protects the needles from mud.

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      KAWASAKI KXF 450 2016

      PIVOT WORKS
      PWSAKK21000

      Specific References

      Click on your bike to see all compatible parts.

      No customer reviews for the moment.

      Write your review
      PIVOT WORKS Swingarm Bearing Kit for KAWASAKI KXF 450 2016
      PIVOT WORKS Swingarm Bearing Kit for KAWASAKI KXF 450 2016
      PIVOT WORKS Swingarm Bearing Kit for KAWASAKI KXF 450 2016
      €108.80
      Tax Included