MOTION PRO T3 Slidelight Hot Start Cable for KAWASAKI KLX 450, KXF 250, KXF 450 and SUZUKI RMZ 250 2005-2010

On KAWASAKI KLX 450, KXF 250, KXF 450 and SUZUKI RMZ 250 from 2005 to 2010, the MOTION PRO T3 Slidelight 03-3002 hot start cable fits in place of the original part. The hot start lets extra air into the intake so that a hot or flooded four-stroke engine restarts easily. Its cable links the control on the handlebar to the carburettor or throttle body.

Specifications

• Brand: MOTION PRO
• Manufacturer part number: 03-3002
• T3 Slidelight housing with low-friction liner
• Engine: 4-stroke

When to replace it?

• Control that's stiff or doesn't return.
• Hard to restart when hot, even with the control pulled.
• Frayed cable or damaged outer sheath.

Replace it as soon as it snags: a hot start that stays open raises the idle speed.

Fitting tips

1. Note the routing of the old cable.
2. Fit the new cable along the same route, with no tight bends, and grease its ends.
3. Set the free play: the control must snap back cleanly to the closed position.

Why MOTION PRO?

Motion Pro was founded in California in 1984 by Chris Carter, a former trials and motocross racer and gold medallist at the ISDT (International Six Days Trial), and the brand started out with control cables. It holds more than 30 patents and develops its parts with riders and mechanics from AMA Supercross, motocross, GNCC and enduro.

Spare parts and items to plan

• Cables : VENHILL · PROX
• Grease : MOTUL 400 g

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
KAWASAKI KLX 450 2009
KAWASAKI KLX 450 2008
KAWASAKI KXF 250 2010
KAWASAKI KXF 250 2009
KAWASAKI KXF 250 2008
KAWASAKI KXF 250 2007
KAWASAKI KXF 250 2006
KAWASAKI KXF 250 2005
KAWASAKI KXF 450 2008
KAWASAKI KXF 450 2007
KAWASAKI KXF 450 2006
SUZUKI RMZ 250 2006
SUZUKI RMZ 250 2005