- New
BIHR Intake Pipe (1 pc) for YAMAHA YFM 550 GRIZZLY 4WD, YFM 550 GRIZZLY EPS 4WD, YFM 550 GRIZZLY EPS CAMO 4WD 2009-2015
€37.90
Tax Included
The inlet manifold is the rubber connector that joins the carburettor to the engine without letting air in.
BIHR offers this inlet manifold for YAMAHA YFM 550 GRIZZLY 4WD, YFM 550 GRIZZLY EPS 4WD, YFM 550 GRIZZLY EPS CAMO 4WD 2009-2015. The inlet manifold (or flange) is the rubber sleeve that holds the carburettor and connects it to the engine’s intake.
Why replace the inlet manifold?
The benefits:
- Cure an air leak that makes the idle unstable and the carburation impossible to set up.
- New, supple rubber holds the carburettor firmly and soaks up vibration.
- Also useful when fitting a different carburettor: a flange of the right diameter makes the connection.
When should you replace this part?
Rubber that is cracked, hard or split, a carburettor that moves in its flange, an idle that creeps up on its own or an engine that runs unusually hot: replace the manifold.
Specifications and fitting tips
- Manufacturer part number: CHY-920
Cross-Mania tip: Fit a new gasket on the engine side if there is one, tighten the screws in a cross pattern and the clamps just enough to stop the carburettor turning, then check the idle stays steady: revs that climb on their own point to an air leak.
Compatibility
Check the exact model and year of your bike in the list below before ordering.
Fits:
YAMAHA YFM 550 GRIZZLY 4WD 2015
YAMAHA YFM 550 GRIZZLY 4WD 2014
YAMAHA YFM 550 GRIZZLY 4WD 2013
YAMAHA YFM 550 GRIZZLY 4WD 2012
YAMAHA YFM 550 GRIZZLY 4WD 2011
YAMAHA YFM 550 GRIZZLY 4WD 2010
YAMAHA YFM 550 GRIZZLY 4WD 2009
YAMAHA YFM 550 GRIZZLY EPS 4WD 2015
YAMAHA YFM 550 GRIZZLY EPS 4WD 2014
YAMAHA YFM 550 GRIZZLY EPS 4WD 2013
YAMAHA YFM 550 GRIZZLY EPS 4WD 2012
YAMAHA YFM 550 GRIZZLY EPS 4WD 2011
YAMAHA YFM 550 GRIZZLY EPS 4WD 2010
YAMAHA YFM 550 GRIZZLY EPS 4WD 2009
YAMAHA YFM 550 GRIZZLY EPS CAMO 4WD 2015
YAMAHA YFM 550 GRIZZLY EPS CAMO 4WD 2014
YAMAHA YFM 550 GRIZZLY EPS CAMO 4WD 2013
YAMAHA YFM 550 GRIZZLY EPS CAMO 4WD 2012
YAMAHA YFM 550 GRIZZLY EPS CAMO 4WD 2011
YAMAHA YFM 550 GRIZZLY EPS CAMO 4WD 2010
YAMAHA YFM 550 GRIZZLY EPS CAMO 4WD 2009
CHY-920
5 Items
Specific References
No customer reviews for the moment.
The inlet manifold is the rubber connector that joins the carburettor to the engine without letting air in.
BIHR Intake Pipe (1 pc) for YAMAHA YFM 550 GRIZZLY 4WD, YFM 550 GRIZZLY EPS 4WD, YFM 550 GRIZZLY EPS CAMO 4WD 2009-2015
€37.90
Tax Included