PROX Steel Intake Valve Conversion Kit for SUZUKI RMZ 450 2007

PROX offers this valve kit for SUZUKI RMZ 450 2007. In a four-stroke engine, the valves open and close the way in for the mixture and the way out for the gases.

Titanium, steel or stainless valve?

This valve is steel.

• Titanium: about 40 % lighter than steel, it lets the engine rev high without valve float; standard on most modern 4-stroke motocross bikes. On the downside, it costs more and its coating wears faster if seats and guides are tired.
• Steel or stainless: heavier but very wear-resistant and cheaper; as a titanium replacement it lasts longer, with springs suited to its weight.
• Tip: replace valves as a set, have the seats checked and fit new valve stem seals.

Why choose PROX?

ProX valves come from Japanese OEM factories; the titanium versions are forged in one piece and chromium-nitride (CrN) coated against wear.

When should you replace the valves on your SUZUKI RMZ 450?

Hard hot starting, valve clearance that keeps closing up or a noisy timing chain: the valve train is wearing.

Specifications and fitting tips

• Manufacturer part number: 28.SIS3407-2

Cross-Mania tip: Check the guides and seats before reassembly and lap the valves in. Titanium valves must not be fitted on worn seats.

Also needed with this part

• Valve stem seals : CENTAURO P650937/4 · CENTAURO P650941/4
• Valve shims : PROX 29.VSA948 · PROX 29.948
• Top-end gasket kit : PROX · ATHENA
• 4-stroke engine oil : LIQUI MOLY 10W40 1 L · MOTUL 10W50

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
SUZUKI RMZ 450 2007