VERTEX Titanium Intake Valve for SUZUKI RMZ 450 2007

VERTEX offers this intake valve for SUZUKI RMZ 450 2007. A four-stroke engine breathes through its valves. The intake valves open to let the air-fuel mixture into the cylinder, then close perfectly tight during combustion.

Titanium, steel or stainless valve?

This valve is titanium.

• Titanium: about 40 % lighter than steel, it lets the engine rev high without valve float; standard on most modern 4-stroke motocross bikes. On the downside, it costs more and its coating wears faster if seats and guides are tired.
• Steel or stainless: heavier but very wear-resistant and cheaper; as a titanium replacement it lasts longer, with springs suited to its weight.
• Tip: replace valves as a set, have the seats checked and fit new valve stem seals.

Why choose VERTEX?

Vertex has manufactured in Italy since 1953 and has supplied KTM’s original pistons since 1996 (KTM, Husqvarna, GASGAS), with ISO 9001-certified production.

When should you replace the valves on your SUZUKI RMZ 450?

Hard hot starting, valve clearance that keeps closing up or a noisy timing chain: the valve train is wearing.

Specifications and fitting tips

• High thermal resistance
• Benchmark in longevity
• Manufacturer part number: 8400022-2

Cross-Mania tip: Check the guides and seats before reassembly and lap the valves in. Titanium valves must not be fitted on worn seats.

Also needed with this part

• Valve stem seals : CENTAURO P650937/4 · CENTAURO P650941/4
• Valve shims : PROX 29.VSA948 · PROX 29.948
• Top-end gasket kit : PROX · ATHENA
• 4-stroke engine oil : LIQUI MOLY 10W40 1 L · MOTUL 10W50

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
SUZUKI RMZ 450 2007