- New
PIVOT WORKS Swingarm Bearing Kit for HONDA XR 600 1993-2000
€94.22
Tax Included
Swingarm bearings let the swingarm pivot on its axle with no play: the rear wheel stays properly guided.
PIVOT WORKS swingarm bearing kit for HONDA XR 600 from 1993 to 2000.
On HONDA XR 600 from 1993 to 2000, the PIVOT WORKS PWSAKH19006 swingarm bearing kit fits in place of the original part. The swingarm pivots on the frame on its bearings. A pivot with play makes the rear vague and runs the chain out of line: this kit rebuilds the swingarm pivot.
Specifications
- Brand: PIVOT WORKS
- Manufacturer part number: PWSAKH19006
When to replace it?
- Play when you lift the rear wheel, bike on a stand.
- Suspension that creaks, sticks or reacts less well over small bumps.
- Rusty needles, torn seals or marked bushings on teardown.
Your bike's service manual gives the exact interval. As a Cross-Mania guideline: strip, clean and grease every 20 to 30 hours of racing or after very muddy rides, once a season for leisure riding; replace as soon as play or a tight spot appears.
Fitting tips
- Note the position of each part as you strip it, side by side.
- Press the needle bearings out, or use a suitable puller, without making the bores oval.
- Press the new bearings in squarely, to the same depth as the old ones.
- Pack bearings, bushings and seal lips with grease before reassembly.
- Tighten the bolts to the manufacturer's torque and check that the suspension moves freely, without play.
Why PIVOT WORKS?
Pivot Works specialises in chassis rebuild kits for off-road bikes and quads: bearings, seals, bushings and spacers grouped by model. The brand claims original-equipment quality, durability and fit, and since 2012 has offered a lifetime replacement of its kits in case of failure (once per kit).
Spare parts and items to plan
- Grease : MOTUL 400 g
Frequently asked questions
Are the bolts supplied?
The kit contains the model's bearings, seals and wear bushings; the bolts and hardware stay original if they are not marked. Compare with the photo if in doubt.
Which grease should I use?
A thick, water-resistant grease, applied generously: it protects the needles from mud.
Compatibility
Check the exact model and year of your bike in the list below before ordering.
Fits:
HONDA XR 600 2000
HONDA XR 600 1999
HONDA XR 600 1998
HONDA XR 600 1997
HONDA XR 600 1996
HONDA XR 600 1995
HONDA XR 600 1994
HONDA XR 600 1993
PWSAKH19006
2 Items
Specific References
Click on your bike to see all compatible parts.
No customer reviews for the moment.
Swingarm bearings let the swingarm pivot on its axle with no play: the rear wheel stays properly guided.
PIVOT WORKS swingarm bearing kit for HONDA XR 600 from 1993 to 2000.
PIVOT WORKS Swingarm Bearing Kit for HONDA XR 600 1993-2000
€94.22
Tax Included