- New
PIVOT WORKS Rear Shock Bearing Kit for HONDA XR 400 1998-2004
€51.83
Tax Included
The shock bearing kit replaces the bearings at the rear shock mounts: no more play or knocking.
PIVOT WORKS rear shock bearing kit for HONDA XR 400 from 1998 to 2004.
On HONDA XR 400 from 1998 to 2004, the PIVOT WORKS PWSHKH21004 rear shock bearing kit fits in place of the original part. The rear shock is mounted to the frame and the linkage through bearings or spherical bearings. With play, the rear knocks and the shock works badly: this kit rebuilds its mounting points.
Specifications
- Brand: PIVOT WORKS
- Manufacturer part number: PWSHKH21004
When to replace it?
- Play when you lift the rear wheel, bike on a stand.
- Suspension that creaks, sticks or reacts less well over small bumps.
- Rusty needles, torn seals or marked bushings on teardown.
Your bike's service manual gives the exact interval. As a Cross-Mania guideline: strip, clean and grease every 20 to 30 hours of racing or after very muddy rides, once a season for leisure riding; replace as soon as play or a tight spot appears.
Fitting tips
- Note the position of each part as you strip it, side by side.
- Press the needle bearings out, or use a suitable puller, without making the bores oval.
- Press the new bearings in squarely, to the same depth as the old ones.
- Pack bearings, bushings and seal lips with grease before reassembly.
- Tighten the bolts to the manufacturer's torque and check that the suspension moves freely, without play.
Why PIVOT WORKS?
Pivot Works specialises in chassis rebuild kits for off-road bikes and quads: bearings, seals, bushings and spacers grouped by model. The brand claims original-equipment quality, durability and fit, and since 2012 has offered a lifetime replacement of its kits in case of failure (once per kit).
Spare parts and items to plan
- Grease : MOTUL 400 g
Frequently asked questions
Are the bolts supplied?
The kit contains the model's bearings, seals and wear bushings; the bolts and hardware stay original if they are not marked. Compare with the photo if in doubt.
Which grease should I use?
A thick, water-resistant grease, applied generously: it protects the needles from mud.
Compatibility
Check the exact model and year of your bike in the list below before ordering.
Fits:
HONDA XR 400 2004
HONDA XR 400 2003
HONDA XR 400 2002
HONDA XR 400 2001
HONDA XR 400 2000
HONDA XR 400 1999
HONDA XR 400 1998
PWSHKH21004
Specific References
Click on your bike to see all compatible parts.
No customer reviews for the moment.
The shock bearing kit replaces the bearings at the rear shock mounts: no more play or knocking.
PIVOT WORKS rear shock bearing kit for HONDA XR 400 from 1998 to 2004.
PIVOT WORKS Rear Shock Bearing Kit for HONDA XR 400 1998-2004
€51.83
Tax Included