PROX Upper Shock Bearing Kit for HONDA CR 80, XR 400 1988-2004

On HONDA CR 80, XR 400 from 1988 to 2004, the PROX 26.310001 shock bearing kit fits in place of the original part. The shock is mounted at both ends on bearings or spherical bearings. Seized or worn, they create play and hold the shock back: the rear end becomes harsh and the suspension loses its sensitivity.

Specifications

• Brand: PROX
• Manufacturer part number: 26.310001

When to replace it?

• Play at the rear when you lift the wheel.
• Spherical bearing or bearing that binds, clunking noise at the rear.
• Rusty bearing or marked sleeve at disassembly.

Check these bearings every time you remove the shock and at the same time as the linkage. Check whether it is the upper or the lower mount (given in the name).

Fitting tips

1. Remove the shock as per the manual.
2. Press out the old bearing or spherical bearing and clean the mounting eye.
3. Press in the new bearing, with the seals and sleeves packed with waterproof grease.
4. Refit the shock and tighten the pivot bolts to the manual's torque.

Why PROX?

ProX Racing Parts has been supplying engine and clutch parts to motocross riders since 1975, from its headquarters near Amsterdam. According to its catalogue, most of its parts are made in Japan, by manufacturers that also produce parts for the Japanese motorcycle makers.

Spare parts and items to plan

• Linkage bearings : PSR · PROX
• Grease : MOTUL 400 g

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
HONDA CR 80 1995
HONDA CR 80 1994
HONDA CR 80 1993
HONDA CR 80 1992
HONDA CR 80 1991
HONDA CR 80 1990
HONDA CR 80 1989
HONDA CR 80 1988
HONDA XR 400 2004
HONDA XR 400 2003
HONDA XR 400 2002
HONDA XR 400 2001
HONDA XR 400 2000
HONDA XR 400 1999
HONDA XR 400 1998