PROX Lower Shock Bearing Kit for HONDA CR 80 1985-1987

The PROX 26.450048 shock bearing kit is designed for HONDA CR 80 from 1985 to 1987. The shock is mounted at both ends on bearings or spherical bearings. Seized or worn, they create play and hold the shock back: the rear end becomes harsh and the suspension loses its sensitivity.

Specifications

• Brand: PROX
• Manufacturer part number: 26.450048

When to replace it?

• Play at the rear when you lift the wheel.
• Spherical bearing or bearing that binds, clunking noise at the rear.
• Rusty bearing or marked sleeve at disassembly.

Check these bearings every time you remove the shock and at the same time as the linkage. Check whether it is the upper or the lower mount (given in the name).

Fitting tips

1. Remove the shock as per the manual.
2. Press out the old bearing or spherical bearing and clean the mounting eye.
3. Press in the new bearing, with the seals and sleeves packed with waterproof grease.
4. Refit the shock and tighten the pivot bolts to the manual's torque.

Why PROX?

Founded in 1975 and based near Amsterdam, ProX specialises in engine and clutch wear parts for off-road bikes. The brand has most of its range made in Japan, by OEM suppliers, for quality on a par with the original parts.

Spare parts and items to plan

• Linkage bearings : PROX · INNTECK
• Grease : MOTUL 400 g

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
HONDA CR 80 1987
HONDA CR 80 1986
HONDA CR 80 1985