• New
    PROX Swingarm Bearing Kit for HONDA CR 125, CR 250, CR 500 1988-2001
    PROX Swingarm Bearing Kit for HONDA CR 125, CR 250, CR 500 1988-2001

    PROX Swingarm Bearing Kit for HONDA CR 125, CR 250, CR 500 1988-2001

    Review (0)
    €89.90
    Tax Included
    Disponible en nuestro proveedor, enviado en 10 a 15 días.

    PROX swingarm bearing kit for HONDA CR 125, CR 250, CR 500 from 1988 to 2001.

    Quantity :
    In stock

    Disponible en nuestro proveedor, enviado en 10 a 15 días.

      On HONDA CR 125, CR 250, CR 500 from 1988 to 2001, the PROX 26.210030 swingarm bearing kit fits in place of the original part. The swingarm pivots on its shaft on every movement of the rear suspension. Its bearings, often needle bearings, wear from water and mud: a swingarm pivot that binds or has play makes the rear end vague and wears out the drivetrain.

      Specifications

      • Brand: PROX
      • Manufacturer part number: 26.210030
      • Weight: 320 g

      When to replace it?

      • Side play at the rear when you shake the wheel from left to right.
      • Pivot that binds when you move the swingarm up and down with the shock removed.
      • Rusty needles or marked sleeves when opened.

      Grease the pivot regularly and replace the bearings as soon as they have play or bind. While you are at it, check the linkage.

      Fitting tips

      1. Support the bike, then remove the rear wheel, the chain and the swingarm pivot shaft.
      2. Drive out the old bearings and sleeves and clean the bores.
      3. Press in the new ones, straight, with the seals and sleeves packed with waterproof grease.
      4. Refit the shaft and tighten to the manual's torque, then check that the swingarm pivots freely, with no play.

      Why PROX?

      ProX Racing Parts has been supplying engine and clutch parts to motocross riders since 1975, from its headquarters near Amsterdam. According to its catalogue, most of its parts are made in Japan, by manufacturers that also produce parts for the Japanese motorcycle makers.

      Spare parts and items to plan

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      HONDA CR 125 1992
      HONDA CR 125 1991
      HONDA CR 125 1990
      HONDA CR 125 1989
      HONDA CR 250 1991
      HONDA CR 250 1990
      HONDA CR 250 1989
      HONDA CR 250 1988
      HONDA CR 500 2001
      HONDA CR 500 2000
      HONDA CR 500 1999
      HONDA CR 500 1998
      HONDA CR 500 1997
      HONDA CR 500 1996
      HONDA CR 500 1995
      HONDA CR 500 1994
      HONDA CR 500 1993
      HONDA CR 500 1992
      HONDA CR 500 1991
      HONDA CR 500 1990
      HONDA CR 500 1989

      PROX
      26.210030
      5 Items

      Specific References

      No customer reviews for the moment.

      Write your review
      PROX Swingarm Bearing Kit for HONDA CR 125, CR 250, CR 500 1988-2001
      PROX Swingarm Bearing Kit for HONDA CR 125, CR 250, CR 500 1988-2001
      PROX Swingarm Bearing Kit for HONDA CR 125, CR 250, CR 500 1988-2001
      €89.90
      Tax Included