INNTECK Swingarm Bearing Kit for HONDA CRF 150, CRF 230 2003-2019

The INNTECK WY-28-1099 swingarm bearing kit is designed for HONDA CRF 150, CRF 230 from 2003 to 2019. The swingarm pivots on its shaft on every movement of the rear suspension. Its bearings, often needle bearings, wear from water and mud: a swingarm pivot that binds or has play makes the rear end vague and wears out the drivetrain.

Specifications

• Brand: INNTECK
• Manufacturer part number: WY-28-1099

When to replace it?

• Side play at the rear when you shake the wheel from left to right.
• Pivot that binds when you move the swingarm up and down with the shock removed.
• Rusty needles or marked sleeves when opened.

Grease the pivot regularly and replace the bearings as soon as they have play or bind. While you are at it, check the linkage.

Fitting tips

1. Support the bike, then remove the rear wheel, the chain and the swingarm pivot shaft.
2. Drive out the old bearings and sleeves and clean the bores.
3. Press in the new ones, straight, with the seals and sleeves packed with waterproof grease.
4. Refit the shaft and tighten to the manual's torque, then check that the swingarm pivots freely, with no play.

Spare parts and items to plan

• Linkage bearings : PROX · MOOSE
• Grease : MOTUL 400 g

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
HONDA CRF 150 2017
HONDA CRF 150 2016
HONDA CRF 150 2015
HONDA CRF 150 2014
HONDA CRF 150 2013
HONDA CRF 150 2012
HONDA CRF 150 2011
HONDA CRF 150 2010
HONDA CRF 150 2009
HONDA CRF 150 2008
HONDA CRF 150 2007
HONDA CRF 150 2006
HONDA CRF 150 2005
HONDA CRF 150 2004
HONDA CRF 150 2003
HONDA CRF 230 2019
HONDA CRF 230 2018
HONDA CRF 230 2017
HONDA CRF 230 2016
HONDA CRF 230 2015
HONDA CRF 230 2014
HONDA CRF 230 2013
HONDA CRF 230 2012
HONDA CRF 230 2011
HONDA CRF 230 2010
HONDA CRF 230 2009
HONDA CRF 230 2008
HONDA CRF 230 2007
HONDA CRF 230 2006
HONDA CRF 230 2005
HONDA CRF 230 2004
HONDA CRF 230 2003