ATHENA wheel bearing 6302 for HONDA CR 125 R, MR 175, TL 125 S, TR 200, XL 175 K from 1976 to 1987

ATHENA offers this wheel bearing 6302 for HONDA CR 125 R, MR 175, TL 125 S, TR 200, XL 175 K from 1976 to 1987. Each wheel spins on two bearings in the hub, separated by a spacer. Water and mud eventually damage them: play, rough spots, noise.

What is this bearing made of?

Races and balls in hardened chrome steel, 100Cr6 type, very hard and fatigue-resistant, protected by rubber seals.

• Double seal (2RS): a seal on each side, very well sealed against water and mud, essential off-road.
• Limit: slightly more drag than a metal-shielded bearing (ZZ), which spins more freely but seals far less well.
• Fitting: press or drift it in on the outer race, never hammer on the seal; keep the pressure washer away from the hubs.

Why choose ATHENA?

Athena, the Italian manufacturer founded in 1973, is an original-equipment supplier to manufacturers such as KTM and Ducati: the same standards for your replacement parts.

When should you replace the bearings on your HONDA TL 125 S?

Check the wheels for play at every wash with the wheel off the ground: a failing bearing can lock the wheel. Pressure washing forces water in and speeds up wear.

Specifications and fitting tips

• Outside diameter: 42 mm
• Inside diameter: 15 mm
• Model: 6302
• Style: Double seal
• Electric Motor Quality (EMQ): tight tolerances for a quiet, vibration-free bearing
• Sourced from leading bearing manufacturers

Cross-Mania tip: Always replace the bearings of a wheel together and check the spacer.

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
HONDA CR 125 R 1978
HONDA CR 125 R 1977
HONDA CR 125 R 1976
HONDA MR 175 1977
HONDA MR 175 1976
HONDA TL 125 S 1979
HONDA TL 125 S 1978
HONDA TL 125 S 1977
HONDA TL 125 S 1976
HONDA TR 200 1987
HONDA TR 200 1986
HONDA XL 175 K 1978
HONDA XL 175 K 1977
HONDA XL 175 K 1976