PROX connecting rod kit for SHERCO SE-R 250, SE-R 300 from 2014 to 2022

PROX offers this connecting rod kit for SHERCO SE-R 250, SE-R 300 from 2014 to 2022. The rod passes the piston’s motion to the crankshaft. Its big-end bearing spins at very high revs and eventually develops play.

Why replace the connecting rod?

The benefits:

• Remove the play that causes noise and vibration.
• Make a high-hours engine reliable again.
• Cheaper than a complete crankshaft when the flywheels are good.

Why choose PROX?

ProX connecting rods are double-forged Japanese steel, heat-treated and shot-peened, made in Japan with the same shape and dimensions as the original part.

When should you replace the connecting rod on your SHERCO SE-R 250?

Unusual vibration, a deep knock that follows engine speed or play in the con-rod: the bottom end needs a rebuild.

The manufacturer publishes no hour interval for this model: have the con-rod play checked at every piston change. Cross-Mania guideline: rebuild the bottom end every 2 to 3 top-end rebuilds.

Specifications and fitting tips

• Material: Forged, Steel
• Comes complete with crank pin, small-end bearing, big-end bearing and washers
• Easy to install

Cross-Mania tip: Fitting requires a press and truing the crankshaft with a dial gauge. If you are not equipped, have it done by a workshop.

Also needed with this part

• Complete engine gasket kit : CENTAURO 912A001FL · CENTAURO 912A005FL
• Piston : PROX · VERTEX
• 2-stroke oil : LIQUI MOLY 1 L 3065 · LIQUI MOLY 1 L 3063

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
SHERCO SE-R 250 2022
SHERCO SE-R 250 2021
SHERCO SE-R 250 2020
SHERCO SE-R 250 2019
SHERCO SE-R 250 2018
SHERCO SE-R 250 2017
SHERCO SE-R 250 2016
SHERCO SE-R 250 2015
SHERCO SE-R 250 2014
SHERCO SE-R 300 2022
SHERCO SE-R 300 2021
SHERCO SE-R 300 2020
SHERCO SE-R 300 2019
SHERCO SE-R 300 2018
SHERCO SE-R 300 2017
SHERCO SE-R 300 2016
SHERCO SE-R 300 2015
SHERCO SE-R 300 2014