• New
    VHM Cylinder Head for KTM EXC 125, SX 125, SXS 125 2001-2006
    VHM Cylinder Head for KTM EXC 125, SX 125, SXS 125 2001-2006

    VHM Cylinder Head for KTM EXC 125, SX 125, SXS 125 2001-2006

    Review (0)
    €281.90
    Tax Included
    Bajo pedido, plazo confirmado en 24 horas.

    VHM cylinder head for KTM EXC 125, SX 125, SXS 125 from 2001 to 2006. Two-piece cylinder head: body and interchangeable combustion chamber insert.

    Quantity :
    On order

    Bajo pedido, plazo confirmado en 24 horas.

      The VHM AA33049 cylinder head is designed for KTM EXC 125, SX 125, SXS 125 from 2001 to 2006. The cylinder head closes off the top of the cylinder and forms the combustion chamber. On a two-piece VHM head, the chamber is a machined insert that can be swapped in a few minutes to adapt the engine's compression.

      Key features

      • Two-piece cylinder head: body and interchangeable combustion chamber insert.
      • Compression adjustable by swapping the insert, without removing the cylinder.

      Specifications

      • Brand: VHM
      • Manufacturer part number: AA33049
      • Engine: 2-stroke

      Who is it for?

      • Original head damaged by pinking (detonation), cracked or warped.
      • You want to match the compression to the fuel, the terrain or a tuned engine.
      • You're after a smoother or snappier engine without changing the cylinder.

      Good to know

      The insert is chosen to suit your engine and your fuel: a smaller chamber volume raises compression, which may call for a higher-octane fuel. Always check the squish when fitting.

      Fitting tips

      1. Clean the cylinder mating face without scratching it.
      2. Fit new O-rings and grease them lightly so they stay in place.
      3. Check the squish (gap between piston and head) with solder wire before riding.
      4. Tighten the head in a criss-cross pattern, in several stages, to the recommended torque.
      5. Fit a new spark plug and refill the coolant.

      Why VHM?

      Founded in 1995, VHM specialises in racing engine parts for motocross, road racing and karting. The brand started out with cylinder heads featuring interchangeable combustion chambers, which became its speciality, and then developed crankshafts, connecting rods and gasket kits.

      Spare parts and items to plan

      Frequently asked questions

      Can I change the compression later?
      Yes: just swap the VHM insert, without removing the cylinder.

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      KTM EXC 125 2006
      KTM EXC 125 2005
      KTM EXC 125 2004
      KTM EXC 125 2003
      KTM EXC 125 2002
      KTM SX 125 2006
      KTM SX 125 2005
      KTM SX 125 2004
      KTM SX 125 2003
      KTM SX 125 2002
      KTM SXS 125 2005
      KTM SXS 125 2004
      KTM SXS 125 2003
      KTM SXS 125 2002
      KTM SXS 125 2001

      VHM
      AA33049

      Specific References

      No customer reviews for the moment.

      Write your review
      VHM Cylinder Head for KTM EXC 125, SX 125, SXS 125 2001-2006
      VHM Cylinder Head for KTM EXC 125, SX 125, SXS 125 2001-2006
      VHM Cylinder Head for KTM EXC 125, SX 125, SXS 125 2001-2006
      €281.90
      Tax Included