• New
    HOT RODS transmission bearing kit for YAMAHA WR 250 F, YZ 250 F, YZ 250 FX from 2019 to 2024
    HOT RODS transmission bearing kit for YAMAHA WR 250 F, YZ 250 F, YZ 250 FX from 2019 to 2024

    HOT RODS transmission bearing kit for YAMAHA WR 250 F, YZ 250 F, YZ 250 FX from 2019 to 2024

    Review (0)
    €123.90
    Tax Included
    Stock del proveedor, enviado en 2 a 5 días.

    A gearbox bearing: it lets the gearbox shafts turn without friction.

    Quantity :
    In stock

    Stock del proveedor, enviado en 2 a 5 días.

      HOT RODS offers this transmission bearing kit for YAMAHA WR 250 F, YZ 250 F, YZ 250 FX from 2019 to 2024. The engine’s shafts run on ball or roller bearings in the cases. They carry heavy loads at high revs and eventually develop play.

      What is this bearing made of?

      Races and balls (or rollers) in hardened chrome steel, 100Cr6 type: a very hard steel that withstands the fatigue of millions of engine revolutions.

      • Open bearing: unsealed, it is lubricated and cooled by the engine oil; clean oil is its best protection.
      • C3 / C4 internal clearance: slightly more clearance than normal for a hot engine’s expansion; always refit the original clearance.
      • Limit: it dislikes dust and old oil; running short of oil destroys it within minutes.

      Why choose HOT RODS?

      Hot Rods, the bottom-end specialist since 1993: crankshafts, rods, bearings and seals for a complete rebuild.

      When should you replace the bearings on your YAMAHA YZ 250 F?

      On competition bikes the main bearings are replaced at every bottom-end rebuild, at the hours recommended by the manufacturer. With the cases open, spin each bearing by hand: the slightest rough spot means it must go.

      Specifications and fitting tips

      • Style: Replacement
      • A must for any new transmission or engine case installation or repair
      • Replacement bearings for main shaft, countershaft and shift drum

      Cross-Mania tip: Heat the cases to remove and fit the bearings without forcing them, and replace the oil seals at the same time.

      Also needed with this part

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      YAMAHA WR 250 F 2024
      YAMAHA WR 250 F 2023
      YAMAHA WR 250 F 2022
      YAMAHA WR 250 F 2021
      YAMAHA WR 250 F 2020
      YAMAHA YZ 250 F 2024
      YAMAHA YZ 250 F 2023
      YAMAHA YZ 250 F 2022
      YAMAHA YZ 250 F 2021
      YAMAHA YZ 250 F 2020
      YAMAHA YZ 250 F 2019
      YAMAHA YZ 250 FX 2024
      YAMAHA YZ 250 FX 2023
      YAMAHA YZ 250 FX 2022
      YAMAHA YZ 250 FX 2021
      YAMAHA YZ 250 FX 2020

      HOT RODS
      HR00162
      9 Items

      Specific References

      No customer reviews for the moment.

      Write your review
      HOT RODS transmission bearing kit for YAMAHA WR 250 F, YZ 250 F, YZ 250 FX from 2019 to 2024
      HOT RODS transmission bearing kit for YAMAHA WR 250 F, YZ 250 F, YZ 250 FX from 2019 to 2024
      HOT RODS transmission bearing kit for YAMAHA WR 250 F, YZ 250 F, YZ 250 FX from 2019 to 2024
      €123.90
      Tax Included