FACTORY LINKS Wheel Bearing Kit for GAS GAS MC 85, HUSQVARNA TC 85 and KTM SX 85 2025-2027

FACTORY LINKS offers this wheel bearing for GAS GAS MC 85, HUSQVARNA TC 85 and KTM SX 85 2025-2027. Each wheel spins on two bearings in the hub, separated by a spacer. Water and mud eventually damage them: play, rough spots, noise.

What is this bearing made of?

Races and balls in hardened chrome steel, 100Cr6 type, very hard and fatigue-resistant, protected by rubber seals.

• Double seal (2RS): a seal on each side, very well sealed against water and mud, essential off-road.
• Limit: slightly more drag than a metal-shielded bearing (ZZ), which spins more freely but seals far less well.
• Fitting: press or drift it in on the outer race, never hammer on the seal; keep the pressure washer away from the hubs.

Why choose FACTORY LINKS?

Factory Links, founded in 2014 by Pierre Mege between Auvergne (France) and Virginia (USA), supplies original equipment to Sherco and Electric Motion and is the official bearing and linkage partner of the FIM Hard Enduro World Championship (2026-2028).

When should you replace the bearings?

Check the wheels for play at every wash with the wheel off the ground: a failing bearing can lock the wheel. Pressure washing forces water in and speeds up wear.

Specifications and fitting tips

• Also to keep out any moisture, we've gone from a 30% grease fill to a 60% for harsh conditions.
• Manufacturer part number: KWK-T-006

Cross-Mania tip: Always replace the bearings of a wheel together and check the spacer.

Also needed with this part

• Grease : MOTUL 400 g 108664 · MOTUL 400 g 108672

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
GAS GAS MC 85 2027
GAS GAS MC 85 2026
GAS GAS MC 85 2025
HUSQVARNA TC 85 2027
HUSQVARNA TC 85 2026
HUSQVARNA TC 85 2025
KTM SX 85 2027
KTM SX 85 2026
KTM SX 85 2025