• New
    FACTORY LINKS Wheel Bearing Kit for GAS GAS TXT 125, TXT 250, SHERCO ST 125, ST 250 and VERTIGO NITRO WORKS 125, NITRO WORKS 250
    FACTORY LINKS Wheel Bearing Kit for GAS GAS TXT 125, TXT 250, SHERCO ST 125, ST 250 and VERTIGO NITRO WORKS 125, NITRO WORKS 250

    FACTORY LINKS Wheel Bearing Kit for GAS GAS TXT 125, TXT 250, SHERCO ST 125, ST 250 and VERTIGO NITRO WORKS 125, NITRO WORKS 250

    Review (0)
    €40.90
    Tax Included
    Más de 5 unidades actualmente en stock en nuestro proveedor, enviado en 2 a 5 días.

    The bearing that lets the wheel spin freely on its axle.

    Quantity :
    In stock

    Más de 5 unidades actualmente en stock en nuestro proveedor, enviado en 2 a 5 días.

      FACTORY LINKS offers this wheel bearing for GAS GAS TXT 125, TXT 250, TXT 250 GP, TXT 280, TXT 300, SHERCO SC 125, ST 125, ST 250, ST 300, TY 125 CLASSIC and VERTIGO NITRO WORKS 125, NITRO WORKS 250, NITRO WORKS 280 2019-2025. Each wheel spins on two bearings in the hub, separated by a spacer. Water and mud eventually damage them: play, rough spots, noise.

      What is this bearing made of?

      Races and balls in hardened chrome steel, 100Cr6 type, very hard and fatigue-resistant, protected by rubber seals.

      • Double seal (2RS): a seal on each side, very well sealed against water and mud, essential off-road.
      • Limit: slightly more drag than a metal-shielded bearing (ZZ), which spins more freely but seals far less well.
      • Fitting: press or drift it in on the outer race, never hammer on the seal; keep the pressure washer away from the hubs.

      Why choose FACTORY LINKS?

      Factory Links, founded in 2014 by Pierre Mege between Auvergne (France) and Virginia (USA), supplies original equipment to Sherco and Electric Motion and is the official bearing and linkage partner of the FIM Hard Enduro World Championship (2026-2028).

      When should you replace the bearings?

      Check the wheels for play at every wash with the wheel off the ground: a failing bearing can lock the wheel. Pressure washing forces water in and speeds up wear.

      Specifications and fitting tips

      • Manufacturer part number: KWK-C-004

      Cross-Mania tip: Always replace the bearings of a wheel together and check the spacer.

      Also needed with this part

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      GAS GAS TXT 125 2024
      GAS GAS TXT 125 2023
      GAS GAS TXT 125 2022
      GAS GAS TXT 125 2021
      GAS GAS TXT 125 2020
      GAS GAS TXT 125 2019
      GAS GAS TXT 125 GP 2022
      GAS GAS TXT 125 GP 2021
      GAS GAS TXT 125 GP 2020
      GAS GAS TXT 125 GP 2019
      GAS GAS TXT 250 2024
      GAS GAS TXT 250 2023
      GAS GAS TXT 250 2022
      GAS GAS TXT 250 2021
      GAS GAS TXT 250 2020
      GAS GAS TXT 250 2019
      GAS GAS TXT 250 GP 2024
      GAS GAS TXT 250 GP 2023
      GAS GAS TXT 250 GP 2022
      GAS GAS TXT 250 GP 2021
      GAS GAS TXT 250 GP 2020
      GAS GAS TXT 250 GP 2019
      GAS GAS TXT 280 2024
      GAS GAS TXT 280 2023
      GAS GAS TXT 280 2022
      GAS GAS TXT 280 2021
      GAS GAS TXT 280 2020
      GAS GAS TXT 280 2019
      GAS GAS TXT 280 GP 2022
      GAS GAS TXT 280 GP 2021
      GAS GAS TXT 280 GP 2020
      GAS GAS TXT 280 GP 2019
      GAS GAS TXT 300 2024
      GAS GAS TXT 300 2023
      GAS GAS TXT 300 2022
      GAS GAS TXT 300 2021
      GAS GAS TXT 300 2020
      GAS GAS TXT 300 2019
      GAS GAS TXT 300 GP 2024
      GAS GAS TXT 300 GP 2023
      GAS GAS TXT 300 GP 2022
      GAS GAS TXT 300 GP 2021
      GAS GAS TXT 300 GP 2020
      GAS GAS TXT 300 GP 2019
      SHERCO SC 125 2020
      SHERCO SC 125 2019
      SHERCO ST 125 2025
      SHERCO ST 125 2024
      SHERCO ST 125 2023
      SHERCO ST 125 2022
      SHERCO ST 125 2021
      SHERCO ST 125 2020
      SHERCO ST 125 20 TH 2020
      SHERCO ST 250 2025
      SHERCO ST 250 2024
      SHERCO ST 250 2023
      SHERCO ST 250 2022
      SHERCO ST 250 2021
      SHERCO ST 300 2025
      SHERCO ST 300 2024
      SHERCO ST 300 2023
      SHERCO ST 300 2022
      SHERCO ST 300 2021
      SHERCO ST 300 FACTORY ADAM RAGA 2025
      SHERCO TY 125 CLASSIC 2020
      SHERCO TY 125 CLASSIC 2019
      VERTIGO NITRO WORKS 125 2024
      VERTIGO NITRO WORKS 250 2024
      VERTIGO NITRO WORKS 280 2024

      FACTORY LINKS
      KWK-C-004
      9 Items

      Specific References

      No customer reviews for the moment.

      Write your review
      FACTORY LINKS Wheel Bearing Kit for GAS GAS TXT 125, TXT 250, SHERCO ST 125, ST 250 and VERTIGO NITRO WORKS 125, NITRO WORKS 250
      FACTORY LINKS Wheel Bearing Kit for GAS GAS TXT 125, TXT 250, SHERCO ST 125, ST 250 and VERTIGO NITRO WORKS 125, NITRO WORKS 250
      FACTORY LINKS Wheel Bearing Kit for GAS GAS TXT 125, TXT 250, SHERCO ST 125, ST 250 and VERTIGO NITRO WORKS 125, NITRO WORKS 250
      €40.90
      Tax Included