TECNIUM Throttle Cable - Push & Pull Cable for HUSQVARNA SMR 450, SMR 510, TE 250 I.E 4T, TE 310 I.E, TE 510 I.E 2008-2014

TECNIUM offers this throttle cable for HUSQVARNA SMR 450, SMR 510, TE 250 I.E 4T, TE 310 I.E, TE 510 I.E 2008-2014. When you twist the grip, the pull cable opens the carburettor or the injection throttle: the engine gets more air and fuel and speeds up.

Why replace the throttle cable?

The benefits:

• A grip that turns smoothly and snaps back on its own.
• Precise throttle response that is easy to control.
• A new cable removes the risk of the throttle staying open.

When should you replace the cable on your HUSQVARNA TE 250 I.E 4T?

Broken strands, a crushed outer or a throttle that is slow to return: the cable needs changing.

Specifications and fitting tips

• Manufacturer part number: 8000B1927

Cross-Mania tip: Follow the original routing, lubricate the cable and set the free play: the throttle must snap shut on its own with the bars on full lock both ways.

Also needed with this part

• Grips : MOTION · ODI
• Grease : SHOWA 500 g · KAYABA

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
HUSQVARNA SMR 450 2010
HUSQVARNA SMR 450 2009
HUSQVARNA SMR 450 2008
HUSQVARNA SMR 510 2010
HUSQVARNA SMR 510 2009
HUSQVARNA SMR 510 2008
HUSQVARNA TE 250 I.E 4T 2014
HUSQVARNA TE 250 I.E 4T 2013
HUSQVARNA TE 250 I.E 4T 2012
HUSQVARNA TE 250 I.E 4T 2011
HUSQVARNA TE 250 I.E 4T 2010
HUSQVARNA TE 250 I.E 4T 2009
HUSQVARNA TE 250 I.E 4T 2008
HUSQVARNA TE 310 I.E 2014
HUSQVARNA TE 310 I.E 2013
HUSQVARNA TE 310 I.E 2012
HUSQVARNA TE 310 I.E 2011
HUSQVARNA TE 310 I.E 2010
HUSQVARNA TE 310 I.E 2009
HUSQVARNA TE 450 I.E 2010
HUSQVARNA TE 450 I.E 2009
HUSQVARNA TE 450 I.E 2008
HUSQVARNA TE 510 I.E 2011
HUSQVARNA TE 510 I.E 2010
HUSQVARNA TE 510 I.E 2009
HUSQVARNA TE 510 I.E 2008