- New


The smooth, shiny tube that slides in and out of the fork over every bump: to be replaced if it is bent, scored or pitted.
TNK offers this fork tube for HONDA CR 250, CR 500, XR 600, XR 650 L 1986-2009. A fork is made of two tubes sliding inside each other, on each side of the front wheel. The fork tube (or stanchion) is the smooth one: it slides into the outer leg when the wheel rides over a bump, then comes back out.
The benefits:
TNK fork tubes, distributed by American suspension specialist Race Tech, are direct replacement tubes to original dimensions with a nickel-chrome finish; they generally cost far less than original-equipment tubes.
Pitted, scored or flaking chrome, a tube bent in a crash, or an oil leak that comes back despite new seals: replace the tube.
Cross-Mania tip: Compare the diameter, length and machining (grooves, threads) with the original tube, replace the oil seals and dust seals at the same time and protect the tube from sharp edges when fitting the seals.
Check the exact model and year of your bike in the list below before ordering.
Fits:
HONDA CR 250 1987
HONDA CR 250 1986
HONDA CR 500 1987
HONDA CR 500 1986
HONDA XR 600 2000
HONDA XR 600 1999
HONDA XR 600 1998
HONDA XR 600 1997
HONDA XR 600 1996
HONDA XR 600 1995
HONDA XR 600 1994
HONDA XR 600 1993
HONDA XR 600 1992
HONDA XR 600 1991
HONDA XR 650 L 2009
HONDA XR 650 L 2008
HONDA XR 650 L 2007
HONDA XR 650 L 2006
HONDA XR 650 L 2005
HONDA XR 650 L 2004
HONDA XR 650 L 2003
HONDA XR 650 L 2002
HONDA XR 650 L 2001
HONDA XR 650 L 2000
HONDA XR 650 L 1999
HONDA XR 650 L 1998
HONDA XR 650 L 1997
HONDA XR 650 L 1996
HONDA XR 650 L 1995
HONDA XR 650 L 1994
HONDA XR 650 L 1993
No customer reviews for the moment.