ATHENA titanium Exhaust Valve for KTM, HUSQVARNA, GAS GAS and HUSABERG 2013-2023

The ATHENA titane VE-270206T exhaust valve is designed for KTM EXCF 250, SXF 250, XCF 250, XCFW 250, GAS GAS ECF 250, EXF 250, MCF 250, HUSQVARNA FC 250, FE 250 and HUSABERG FE 250 from 2013 to 2023. On a four-stroke, the exhaust valve has gases at several hundred degrees flowing past it on every cycle. A tired valve loses compression and makes hot starts difficult.

Specifications

• Brand: ATHENA
• Manufacturer part number: VE-270206T
• EAN code: 8056684268702
• Weight: 30 g
• Engine: 4-stroke

When to replace it?

• Valve clearance closing up from one check to the next.
• Hard hot starting, loss of compression.
• Marked valve face or cupped valve when removed.

As soon as the valve clearance no longer holds between two checks. Always replace the valves on the same side together and have the seats recut.

Fitting tips

1. Have the valve seats recut and check the guides.
2. Don't lap a coated titanium valve with grinding paste: it would destroy the coating.
3. Fit new valve stem seals and check the springs.
4. Set the valve clearance with valve shims if needed, then check it again after the first few hours.
5. Refit with a valve cover gasket in good condition.

Why ATHENA?

Founded in 1973 near Vicenza, Athena is an Italian engine gasket specialist that has made its gaskets on its own production lines since day one, as well as a renowned manufacturer of pistons and cylinder kits. The brand supplies original equipment to manufacturers such as KTM, Ducati, Fantic, Piaggio and Triumph, and is a partner of the MXGP motocross world championship.

Spare parts and items to plan

• Valve stem seals : PROX · CENTAURO
• Valve shims : PROX 29.890 · PROX 29.VSA890
• Valve cover gasket : MOOSE · ATHENA

Frequently asked questions

Do both valves need replacing?
Yes, exhaust valves are usually replaced as a pair, with the seats recut.

Titanium or steel?
Titanium is much lighter: the valve train copes better with high revs. Steel is more tolerant of wear and is perfectly suited to leisure riding; don't mix the two materials without following the manufacturer's recommendations (springs).

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
GAS GAS ECF 250 2023
GAS GAS ECF 250 2022
GAS GAS ECF 250 2021
GAS GAS EXF 250 2023
GAS GAS EXF 250 2022
GAS GAS EXF 250 2021
GAS GAS MCF 250 2023
GAS GAS MCF 250 2022
GAS GAS MCF 250 2021
HUSABERG FE 250 2014
HUSQVARNA FC 250 2021
HUSQVARNA FC 250 2020
HUSQVARNA FC 250 2019
HUSQVARNA FC 250 2018
HUSQVARNA FC 250 2017
HUSQVARNA FC 250 2016
HUSQVARNA FC 250 2015
HUSQVARNA FC 250 2014
HUSQVARNA FE 250 2023
HUSQVARNA FE 250 2022
HUSQVARNA FE 250 2021
HUSQVARNA FE 250 2020
HUSQVARNA FE 250 2019
HUSQVARNA FE 250 2018
HUSQVARNA FE 250 2017
HUSQVARNA FE 250 2016
HUSQVARNA FE 250 2015
HUSQVARNA FE 250 2014
KTM EXCF 250 2023
KTM EXCF 250 2022
KTM EXCF 250 2021
KTM EXCF 250 2020
KTM EXCF 250 2019
KTM EXCF 250 2018
KTM EXCF 250 2017
KTM EXCF 250 2016
KTM EXCF 250 2015
KTM EXCF 250 2014
KTM SXF 250 2022
KTM SXF 250 2021
KTM SXF 250 2020
KTM SXF 250 2019
KTM SXF 250 2018
KTM SXF 250 2017
KTM SXF 250 2016
KTM SXF 250 2015
KTM SXF 250 2014
KTM SXF 250 2013
KTM XCF 250 2022
KTM XCF 250 2021
KTM XCF 250 2020
KTM XCF 250 2019
KTM XCF 250 2018
KTM XCF 250 2017
KTM XCF 250 2016
KTM XCF 250 2015
KTM XCF 250 2014
KTM XCF 250 2013
KTM XCFW 250 2016
KTM XCFW 250 2015
KTM XCFW 250 2014