• New
    ATHENA Cylinder Base Gasket for YAMAHA YZ 65 2018-2026
    ATHENA Cylinder Base Gasket for YAMAHA YZ 65 2018-2026
    ATHENA Cylinder Base Gasket for YAMAHA YZ 65 2018-2026
    ATHENA Cylinder Base Gasket for YAMAHA YZ 65 2018-2026
    ATHENA Cylinder Base Gasket for YAMAHA YZ 65 2018-2026
    ATHENA Cylinder Base Gasket for YAMAHA YZ 65 2018-2026
    ATHENA Cylinder Base Gasket for YAMAHA YZ 65 2018-2026

    ATHENA Cylinder Base Gasket for YAMAHA YZ 65 2018-2026

    Review (0)
    €5.90
    Tax Included
    Disponible en nuestro proveedor, enviado en 10 a 15 días.

    The gasket fitted between the crankcase and the cylinder: it seals the joint and sets the cylinder height.

    Available in several thicknesses.

    Thickness :
    Quantity :
    In stock

    Disponible en nuestro proveedor, enviado en 10 a 15 días.

      ATHENA offers this cylinder base gasket for YAMAHA YZ 65 2018-2026. The base gasket sits under the cylinder, on the crankcase. Crushed when tightened, it cannot be reused: replace it every time the cylinder comes off.

      Why does the thickness matter?

      The benefits:

      • The OE thickness keeps the cylinder height intended by the manufacturer.
      • Another thickness lets you correct piston-to-head clearance after machining or adjust the port timing of a 2-stroke.
      • A new gasket keeps the bottom end sealed against oil and gases.

      Why choose ATHENA?

      Athena, founded in 1973 by Giovanni Mancassola near Vicenza and based in Alonte (Italy), designs gaskets, pistons and cylinder kits; it supplies original equipment to manufacturers such as KTM, Ducati, Fantic and Triumph.

      When should you replace the base gasket on your YAMAHA YZ 65?

      Every time the cylinder comes off: piston change, top-end rebuild or cylinder inspection. Oil or mixture seeping at the base of the cylinder also points to a tired gasket.

      No manufacturer figure in hours for this model. Cross-Mania guideline: compression check every 15 h of hard use and every 30 h of leisure riding.

      Specifications and fitting tips

      • Manufacturer part numbers: S410485006295 (OE), S410485006296 (0.10 mm), S410485006297 (0.20 mm), S410485006298 (0.30 mm), S410485006299 (0.40 mm), S410485006300 (0.60 mm)

      Choose the thickness from the list. "OE" is the factory thickness; another thickness is used to set the cylinder height after a rebuild (piston-to-head clearance, port timing on a 2-stroke).

      Cross-Mania tip: Choose the OE thickness if the cylinder and head have not been machined; if in doubt, measure the squish with solder wire before final assembly.

      Spare parts and items to plan

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      YAMAHA YZ 65 2026
      YAMAHA YZ 65 2025
      YAMAHA YZ 65 2024
      YAMAHA YZ 65 2023
      YAMAHA YZ 65 2022
      YAMAHA YZ 65 2021
      YAMAHA YZ 65 2020
      YAMAHA YZ 65 2019
      YAMAHA YZ 65 2018

      ATHENA
      S410485006295
      13 Items

      Specific References

      No customer reviews for the moment.

      Write your review
      ATHENA Cylinder Base Gasket for YAMAHA YZ 65 2018-2026
      ATHENA Cylinder Base Gasket for YAMAHA YZ 65 2018-2026
      ATHENA Cylinder Base Gasket for YAMAHA YZ 65 2018-2026
      €5.90
      Tax Included