- New








ATHENA offers this cylinder base gasket for KTM EXCF 250, SXF 250, XCF 250, XCFW 250 2006-2013. The base gasket sits under the cylinder, on the crankcase. Crushed when tightened, it cannot be reused: replace it every time the cylinder comes off.
The benefits:
Athena, founded in 1973 by Giovanni Mancassola near Vicenza and based in Alonte (Italy), designs gaskets, pistons and cylinder kits; it supplies original equipment to manufacturers such as KTM, Ducati, Fantic and Triumph.
Every time the cylinder comes off: piston change, top-end rebuild or cylinder inspection. Oil or mixture seeping at the base of the cylinder also points to a tired gasket.
No manufacturer figure in hours for this model. Cross-Mania guideline: compression check every 50 h of hard use and every 100 h of leisure riding.
Choose the thickness from the list. "OE" is the factory thickness; another thickness is used to set the cylinder height after a rebuild (piston-to-head clearance, port timing on a 2-stroke).
Cross-Mania tip: Choose the OE thickness if the cylinder and head have not been machined; if in doubt, measure the squish with solder wire before final assembly.
Check the exact model and year of your bike in the list below before ordering.
Fits:
KTM EXCF 250 2013
KTM SXF 250 2012
KTM SXF 250 2011
KTM SXF 250 2010
KTM SXF 250 2009
KTM SXF 250 2008
KTM SXF 250 2007
KTM SXF 250 2006
KTM XCF 250 2012
KTM XCF 250 2011
KTM XCF 250 2010
KTM XCF 250 2009
KTM XCF 250 2008
KTM XCF 250 2007
KTM XCFW 250 2013
KTM XCFW 250 2012
KTM XCFW 250 2011
KTM XCFW 250 2010
KTM XCFW 250 2009
KTM XCFW 250 2008
KTM XCFW 250 2007
KTM XCFW 250 2006
Click on your bike to see all compatible parts.
No customer reviews for the moment.