• New
    ATHENA Cylinder Base Gasket for HONDA XL 250, XR 250 1984-2001
    ATHENA Cylinder Base Gasket for HONDA XL 250, XR 250 1984-2001

    ATHENA Cylinder Base Gasket for HONDA XL 250, XR 250 1984-2001

    Review (0)
    €4.50
    Tax Included
    Disponible en nuestro proveedor, enviado en 10 a 15 días.

    The gasket fitted between the crankcase and the cylinder: it seals the joint and sets the cylinder height.

    Quantity :
    In stock

    Disponible en nuestro proveedor, enviado en 10 a 15 días.

    Wishlist
    Write your review

      ATHENA offers this cylinder base gasket for HONDA XL 250, XR 250 1984-2001. The base gasket sits under the cylinder, on the crankcase. Crushed when tightened, it cannot be reused: replace it every time the cylinder comes off.

      Why does the thickness matter?

      The benefits:

      • The OE thickness keeps the cylinder height intended by the manufacturer.
      • Another thickness lets you correct piston-to-head clearance after machining or adjust the port timing of a 2-stroke.
      • A new gasket keeps the bottom end sealed against oil and gases.

      Why choose ATHENA?

      Athena, founded in 1973 by Giovanni Mancassola near Vicenza and based in Alonte (Italy), designs gaskets, pistons and cylinder kits; it supplies original equipment to manufacturers such as KTM, Ducati, Fantic and Triumph.

      When should you replace the base gasket on your HONDA XR 250?

      Every time the cylinder comes off: piston change, top-end rebuild or cylinder inspection. Oil or mixture seeping at the base of the cylinder also points to a tired gasket.

      No manufacturer figure in hours for this model. Cross-Mania guideline: compression check every 50 h of hard use and every 100 h of leisure riding.

      Specifications and fitting tips

      • Thickness : OE
      • Manufacturer part number: S410210006025

      Cross-Mania tip: Choose the OE thickness if the cylinder and head have not been machined; if in doubt, measure the squish with solder wire before final assembly.

      Spare parts and items to plan

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      HONDA XL 250 1999
      HONDA XL 250 1998
      HONDA XL 250 1997
      HONDA XL 250 1996
      HONDA XL 250 1995
      HONDA XL 250 1994
      HONDA XL 250 1993
      HONDA XL 250 1992
      HONDA XL 250 1991
      HONDA XL 250 1990
      HONDA XL 250 1989
      HONDA XL 250 1988
      HONDA XL 250 1987
      HONDA XL 250 1986
      HONDA XL 250 1985
      HONDA XL 250 1984
      HONDA XR 250 2001
      HONDA XR 250 2000
      HONDA XR 250 1999
      HONDA XR 250 1998
      HONDA XR 250 1997
      HONDA XR 250 1996
      HONDA XR 250 1995
      HONDA XR 250 1994
      HONDA XR 250 1993
      HONDA XR 250 1992
      HONDA XR 250 1991
      HONDA XR 250 1990
      HONDA XR 250 1989
      HONDA XR 250 1988
      HONDA XR 250 1987
      HONDA XR 250 1986
      HONDA XR 250 1985
      HONDA XR 250 1984

      ATHENA
      S410210006025
      8 Items

      Specific References

      Click on your bike to see all compatible parts.

      Write your review

      No customer reviews for the moment.

      Write your review
      ATHENA Cylinder Base Gasket for HONDA XL 250, XR 250 1984-2001
      ATHENA Cylinder Base Gasket for HONDA XL 250, XR 250 1984-2001
      ATHENA Cylinder Base Gasket for HONDA XL 250, XR 250 1984-2001
      ATHENA Cylinder Base Gasket for HONDA XL 250, XR 250 1984-2001
      €4.50
      Tax Included