• New
    ATHENA Cylinder Head Gasket O-ring Ø91.70 x 1.78 mm for GAS GAS EC 125, MC 125 and KAWASAKI KX 125 2001-2015
    ATHENA Cylinder Head Gasket O-ring Ø91.70 x 1.78 mm for GAS GAS EC 125, MC 125 and KAWASAKI KX 125 2001-2015

    ATHENA Cylinder Head Gasket O-ring Ø91.70 x 1.78 mm for GAS GAS EC 125, MC 125 and KAWASAKI KX 125 2001-2015

    Review (0)
    €3.50
    Tax Included
    Available from our supplier, shipped within 10 to 15 days.

    The gasket between cylinder and head: it holds compression and keeps water, oil and gases apart.

    Quantity :
    In stock

    Available from our supplier, shipped within 10 to 15 days.

      ATHENA offers this cylinder head gasket for GAS GAS EC 125, MC 125 and KAWASAKI KX 125 2001-2015. The head gasket takes the pressure and heat of every combustion. It is crushed when the head is torqued down and must be replaced every time the head comes off.

      Why replace this gasket every time it is removed?

      The benefits:

      • A new gasket guarantees a perfectly sealed joint.
      • Material designed to withstand heat, oil and coolant.
      • An inexpensive part that saves doing the job twice.

      Why choose ATHENA?

      Athena, founded in 1973 by Giovanni Mancassola near Vicenza and based in Alonte (Italy), designs gaskets, pistons and cylinder kits; it supplies original equipment to manufacturers such as KTM, Ducati, Fantic and Triumph.

      When should you replace the head gasket on your GAS GAS EC 125?

      Loss of compression, a dropping coolant level, bubbles in the radiator or traces between cylinder and head: the gasket needs changing. It is also replaced every time the head comes off.

      No manufacturer figure in hours for this model. Cross-Mania guideline: compression check every 20 h of hard use and every 40 h of leisure riding.

      Specifications and fitting tips

      • Material: FKM (Viton)
      • Manufacturer part number: M751802362094

      Spare parts and items to plan

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      GAS GAS EC 125 2015
      GAS GAS EC 125 2014
      GAS GAS EC 125 2013
      GAS GAS EC 125 2011
      GAS GAS EC 125 2010
      GAS GAS EC 125 2007
      GAS GAS EC 125 2006
      GAS GAS EC 125 2005
      GAS GAS EC 125 2004
      GAS GAS EC 125 2003
      GAS GAS EC 125 2002
      GAS GAS EC 125 2001
      GAS GAS MC 125 2011
      GAS GAS MC 125 2007
      GAS GAS MC 125 2006
      GAS GAS MC 125 2005
      GAS GAS MC 125 2004
      GAS GAS MC 125 2003
      GAS GAS MC 125 2002
      GAS GAS MC 125 2001
      KAWASAKI KX 125 2008
      KAWASAKI KX 125 2007
      KAWASAKI KX 125 2006
      KAWASAKI KX 125 2005
      KAWASAKI KX 125 2004
      KAWASAKI KX 125 2003

      ATHENA
      M751802362094
      34 Items

      Specific References

      No customer reviews for the moment.

      Write your review
      ATHENA Cylinder Head Gasket O-ring Ø91.70 x 1.78 mm for GAS GAS EC 125, MC 125 and KAWASAKI KX 125 2001-2015
      ATHENA Cylinder Head Gasket O-ring Ø91.70 x 1.78 mm for GAS GAS EC 125, MC 125 and KAWASAKI KX 125 2001-2015
      ATHENA Cylinder Head Gasket O-ring Ø91.70 x 1.78 mm for GAS GAS EC 125, MC 125 and KAWASAKI KX 125 2001-2015
      €3.50
      Tax Included