• New
    ATHENA Top End Gasket Kit for ATHENA standard bore cylinder kit for RIEJU, BETA, APRILIA and HM 1992-2024
    ATHENA Top End Gasket Kit for ATHENA standard bore cylinder kit for RIEJU, BETA, APRILIA and HM 1992-2024

    ATHENA Top End Gasket Kit for ATHENA standard bore cylinder kit for RIEJU, BETA, APRILIA and HM 1992-2024

    Review (0)
    €12.90
    Tax Included
    Bajo pedido, plazo confirmado en 24 horas.

    ATHENA top end gasket kit for APRILIA MX 50, PEGASO 50, RX 50, RIEJU MRT 50, RR 50, BETA RR 50 and HM CRE 50 from 1992 to 2024. Head, base and exhaust gaskets, O-rings and washers, depending on the model.

    Quantity :
    On order

    Bajo pedido, plazo confirmado en 24 horas.

      The ATHENA P400130160001 top end gasket kit is designed for APRILIA MX 50, PEGASO 50, RX 50, RIEJU MRT 50, RR 50, BETA RR 50 and HM CRE 50 from 1992 to 2024. The top end gasket kit brings together the gaskets to replace every time the cylinder head or cylinder comes off. A gasket crushed by tightening never gets its shape back: refitting it means risking a compression, coolant or oil leak, and having to strip everything down again.

      Key features

      • Head, base and exhaust gaskets, O-rings and washers, depending on the model.
      • Laser cutting and surface treatments for consistent sealing.
      • Designed by Athena, an OEM supplier, and validated on test benches.

      Specifications

      • Brand: ATHENA
      • Manufacturer part number: P400130160001
      • EAN code: 8052780270649
      • Weight: 50 g
      • Engine: 2-stroke

      When to replace it?

      • Coolant or oil seeping at the head/cylinder or cylinder/crankcase joint.
      • Coolant level dropping, bubbles in the radiator.
      • Hissing or black marks where the exhaust leaves the cylinder.

      At every piston change and every time the cylinder head or cylinder is removed, even for a simple inspection. Gaskets cost little compared with the work of stripping the engine.

      Fitting tips

      1. Clean the gasket faces without scratching them (plastic scraper, solvent): they must be clean, dry and free of burrs.
      2. Fit the gaskets dry, without sealant, unless the workshop manual says otherwise.
      3. Refit a base gasket of the same thickness as the old one, unless you are deliberately adjusting the squish.
      4. Tighten the cylinder head in a criss-cross pattern, in several stages, up to the manufacturer's torque.
      5. While it's apart, replace the spark plug and refill the coolant.
      6. After break-in, check the torque with the engine cold and make sure there are no leaks.

      Why ATHENA?

      Athena, an Italian company founded in 1973 near Vicenza, designs gaskets, pistons and cylinder kits for motorcycles. An OEM supplier to KTM, Ducati, Fantic, Piaggio and Triumph and a partner of the MXGP world championship, it develops its parts on the test bench and on the track with racing teams.

      Spare parts and items to plan

      Frequently asked questions

      What does the kit contain?
      Depending on the model: head gasket, base gasket, exhaust gasket, O-rings and washers. Compare with your original gaskets if you're unsure.

      Should I replace it along with the piston?
      Yes: as soon as the cylinder head and cylinder are off, new gaskets go back on. It's the right time to fit a new piston kit and new rings if the engine has some hours on it.

      Compatibility

      Check the exact model and year of your bike in the list below before ordering.

      Fits:
      APRILIA MX 50 2004
      APRILIA MX 50 2003
      APRILIA MX 50 2002
      APRILIA PEGASO 50 1997
      APRILIA PEGASO 50 1996
      APRILIA PEGASO 50 1995
      APRILIA PEGASO 50 1994
      APRILIA PEGASO 50 1993
      APRILIA PEGASO 50 1992
      APRILIA RX 50 2004
      APRILIA RX 50 2003
      APRILIA RX 50 2002
      APRILIA RX 50 2001
      APRILIA RX 50 2000
      APRILIA RX 50 1999
      APRILIA RX 50 1998
      APRILIA RX 50 1997
      APRILIA RX 50 1996
      APRILIA RX 50 1995
      BETA RR 50 2024
      BETA RR 50 2023
      BETA RR 50 2022
      BETA RR 50 2021
      BETA RR 50 2020
      BETA RR 50 2019
      BETA RR 50 2018
      BETA RR 50 2017
      BETA RR 50 2016
      BETA RR 50 2015
      BETA RR 50 2014
      BETA RR 50 2013
      BETA RR 50 2012
      BETA RR 50 2011
      BETA RR 50 2010
      BETA RR 50 2009
      BETA RR 50 2008
      BETA RR 50 2007
      BETA RR 50 2006
      BETA RR 50 2005
      BETA RR 50 2004
      BETA RR 50 2003
      BETA RR 50 2002
      BETA RR 50 2001
      BETA RR 50 2000
      BETA RR 50 1999
      BETA RR 50 1998
      HM CRE 50 2017
      HM CRE 50 2016
      HM CRE 50 2015
      HM CRE 50 2014
      HM CRE 50 2013
      HM CRE 50 2012
      HM CRE 50 2011
      HM CRE 50 2010
      HM CRE 50 2009
      HM CRE 50 2008
      HM CRE 50 2007
      HM CRE 50 2006
      HM CRE 50 2005
      HM CRE 50 2004
      HM CRE 50 2003
      HM CRE 50 2002
      HM CRE 50 2001
      HM CRE 50 2000
      HM CRE 50 1999
      RIEJU MRT 50 2024
      RIEJU MRT 50 2023
      RIEJU MRT 50 2022
      RIEJU MRT 50 2021
      RIEJU MRT 50 2020
      RIEJU MRT 50 2019
      RIEJU MRT 50 2018
      RIEJU MRT 50 2017
      RIEJU MRT 50 2016
      RIEJU MRT 50 2015
      RIEJU MRT 50 2014
      RIEJU MRT 50 2013
      RIEJU MRT 50 2012
      RIEJU MRT 50 2011
      RIEJU MRT 50 2010
      RIEJU MRT 50 2009
      RIEJU RR 50 2008
      RIEJU RR 50 2007
      RIEJU RR 50 2006
      RIEJU RR 50 2005
      RIEJU RR 50 2004
      RIEJU RR 50 2003
      RIEJU RR 50 2002
      RIEJU RR 50 2001
      RIEJU RR 50 2000
      RIEJU RR 50 1999
      RIEJU RR 50 1998
      RIEJU RR 50 1997
      RIEJU RR 50 1996
      RIEJU RR 50 1995
      RIEJU RR 50 1994
      RIEJU RR 50 1993

      ATHENA
      P400130160001

      Specific References

      Click on your bike to see all compatible parts.

      No customer reviews for the moment.

      Write your review
      ATHENA Top End Gasket Kit for ATHENA standard bore cylinder kit for RIEJU, BETA, APRILIA and HM 1992-2024
      ATHENA Top End Gasket Kit for ATHENA standard bore cylinder kit for RIEJU, BETA, APRILIA and HM 1992-2024
      ATHENA Top End Gasket Kit for ATHENA standard bore cylinder kit for RIEJU, BETA, APRILIA and HM 1992-2024
      €12.90
      Tax Included