ART Complete Rear Shaft Grizzly 700 for YAMAHA YFM 700 GRIZZLY EPS 4WD, YFM 700 GRIZZLY EPS X 4WD, YFM 700 GRIZZLY EPS XT-R

ART offers this drive shaft for YAMAHA YFM 700 GRIZZLY EPS 4WD, YFM 700 GRIZZLY EPS CAMO 4WD, YFM 700 GRIZZLY EPS X 4WD, YFM 700 GRIZZLY EPS XT-R 2016-2025. On a 4x4 quad or a side-by-side, the drive shaft is the shaft that links the differential to the wheel and carries engine power to it.

Why replace the drive shaft?

The benefits:

• Get back a drivetrain free of clicks and vibration, even under load and on full lock.
• A complete shaft is swapped in one go: no need to strip and regrease the joints one by one.
• A part made for your model that fits in place of the original without modification.

When should you replace this part?

Clicking when steering or accelerating, vibration, grease flung onto the rim or a split boot: the joint is wearing, replace the drive shaft before it breaks.

Specifications and fitting tips

• Position: Rear
• Manufacturer part number: PAXL-8022

Cross-Mania tip: Grease the splines, check the shaft is clipped into the differential by pulling on it by hand, then tighten the hub nut to the specified torque and lock it (new split pin or staking, depending on the model).

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
YAMAHA YFM 700 GRIZZLY EPS 4WD 2025
YAMAHA YFM 700 GRIZZLY EPS 4WD 2024
YAMAHA YFM 700 GRIZZLY EPS 4WD 2023
YAMAHA YFM 700 GRIZZLY EPS 4WD 2022
YAMAHA YFM 700 GRIZZLY EPS 4WD 2021
YAMAHA YFM 700 GRIZZLY EPS 4WD 2020
YAMAHA YFM 700 GRIZZLY EPS 4WD 2019
YAMAHA YFM 700 GRIZZLY EPS 4WD 2018
YAMAHA YFM 700 GRIZZLY EPS 4WD 2017
YAMAHA YFM 700 GRIZZLY EPS 4WD 2016
YAMAHA YFM 700 GRIZZLY EPS CAMO 4WD 2016
YAMAHA YFM 700 GRIZZLY EPS X 4WD 2018
YAMAHA YFM 700 GRIZZLY EPS X 4WD 2016
YAMAHA YFM 700 GRIZZLY EPS XT-R 2025
YAMAHA YFM 700 GRIZZLY EPS XT-R 2024
YAMAHA YFM 700 GRIZZLY EPS XT-R 2023
YAMAHA YFM 700 GRIZZLY EPS XT-R 2022
YAMAHA YFM 700 GRIZZLY EPS XT-R 2021
YAMAHA YFM 700 GRIZZLY EPS XT-R 2020