ART Complete Rear Right Shaft CFMOTO CF 500 Rancher for CF MOTO CF 500, CF 500 RANCHER, CF 500 TERRACROSS, CF 500 TERRALANDER

ART offers this drive shaft for CF MOTO CF 500, CF 500 RANCHER, CF 500 TERRACROSS, CF 500 TERRALANDER 2009-2014. On a 4x4 quad or a side-by-side, the drive shaft is the shaft that links the differential to the wheel and carries engine power to it.

Why replace the drive shaft?

The benefits:

• Get back a drivetrain free of clicks and vibration, even under load and on full lock.
• A complete shaft is swapped in one go: no need to strip and regrease the joints one by one.
• A part made for your model that fits in place of the original without modification.

When should you replace this part?

Clicking when steering or accelerating, vibration, grease flung onto the rim or a split boot: the joint is wearing, replace the drive shaft before it breaks.

Specifications and fitting tips

• Position: Rear right
• Manufacturer part number: PAXL-14004

Cross-Mania tip: Grease the splines, check the shaft is clipped into the differential by pulling on it by hand, then tighten the hub nut to the specified torque and lock it (new split pin or staking, depending on the model).

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
CF MOTO CF 500 2010
CF MOTO CF 500 2009
CF MOTO CF 500 RANCHER 2012
CF MOTO CF 500 RANCHER 2011
CF MOTO CF 500 RANCHER 2010
CF MOTO CF 500 TERRACROSS 2012
CF MOTO CF 500 TERRACROSS 2011
CF MOTO CF 500 TERRALANDER 2014
CF MOTO CF 500 TERRALANDER 2013