ART Complete Rear Left Shaft Can Am Outlander L/L MAX DPS for CAN-AM OUTLANDER MAX 570 EFI, OUTLANDER MAX 570 EFI PRO 2015-2019

ART offers this drive shaft for CAN-AM OUTLANDER L 450 EFI, OUTLANDER MAX 450 EFI, OUTLANDER MAX 570 EFI, OUTLANDER MAX 570 EFI DPS XT, OUTLANDER MAX 570 EFI PRO 2015-2019. On a 4x4 quad or a side-by-side, the drive shaft is the shaft that links the differential to the wheel and carries engine power to it.

Why replace the drive shaft?

The benefits:

• Get back a drivetrain free of clicks and vibration, even under load and on full lock.
• A complete shaft is swapped in one go: no need to strip and regrease the joints one by one.
• A part made for your model that fits in place of the original without modification.

When should you replace this part?

Clicking when steering or accelerating, vibration, grease flung onto the rim or a split boot: the joint is wearing, replace the drive shaft before it breaks.

Specifications and fitting tips

• Position: Rear left
• Manufacturer part number: PAXL-3024

Cross-Mania tip: Grease the splines, check the shaft is clipped into the differential by pulling on it by hand, then tighten the hub nut to the specified torque and lock it (new split pin or staking, depending on the model).

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
CAN-AM OUTLANDER L 450 EFI 2016
CAN-AM OUTLANDER L 450 EFI 2015
CAN-AM OUTLANDER MAX 450 EFI 2019
CAN-AM OUTLANDER MAX 450 EFI 2018
CAN-AM OUTLANDER MAX 570 EFI 2019
CAN-AM OUTLANDER MAX 570 EFI 2018
CAN-AM OUTLANDER MAX 570 EFI 2017
CAN-AM OUTLANDER MAX 570 EFI 2016
CAN-AM OUTLANDER MAX 570 EFI DPS XT 2019
CAN-AM OUTLANDER MAX 570 EFI DPS XT 2018
CAN-AM OUTLANDER MAX 570 EFI PRO 2019
CAN-AM OUTLANDER MAX 570 EFI PRO 2018
CAN-AM OUTLANDER MAX 570 EFI PRO 2017
CAN-AM OUTLANDER MAX 570 EFI PRO 2016