TECNIUM EliteGrip CVT Belt for KYMCO MAXXER 450, MAXXER 450 I SE, MXU 450, MXU 450 2WD E4 and ARCTIC CAT 500 4WD AUTO TRANS.

TECNIUM offers this drive belt for KYMCO MAXXER 450, MAXXER 450 I SE, MXU 450, MXU 450 2WD E4 and ARCTIC CAT 500 4WD AUTO TRANS. 2010-2021. A variator (CVT) transmission has no gears to shift: the belt runs between two pulleys whose halves move closer together or further apart depending on engine speed and load.

Why replace the belt in time?

The benefits:

• Get back the acceleration and top speed lost to a worn, slipping belt.
• Avoid a breakdown mid-ride: a belt that snaps leaves the quad stranded, often far from anywhere.
• A reinforced belt copes better with loaded starts, climbs, mud and towing.

When should you replace this part?

Width below the minimum, smooth shiny (glazed) sides, cracks, missing cogs or fraying: replace the belt before it snaps mid-ride.

Specifications and fitting tips

• Material: Very High Strength Aramid
• Belt quality: Reinforced
• Specificity: 325cc-1000cc
• Manufacturer part number: AUS24-06

Cross-Mania tip: Clean and degrease the pulley faces before fitting, follow the direction-of-rotation arrow if the belt has one and follow the manufacturer's break-in procedure.

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
ARCTIC CAT 500 4WD AUTO TRANS. 2017
ARCTIC CAT 500 4WD AUTO TRANS. 2016
ARCTIC CAT 500 4WD AUTO TRANS. 2015
ARCTIC CAT 500 4WD AUTO TRANS. 2014
KYMCO MAXXER 450 2018
KYMCO MAXXER 450 2017
KYMCO MAXXER 450 2016
KYMCO MAXXER 450 2015
KYMCO MAXXER 450 2014
KYMCO MAXXER 450 2013
KYMCO MAXXER 450 2012
KYMCO MAXXER 450 2011
KYMCO MAXXER 450 2010
KYMCO MAXXER 450 I SE 2021
KYMCO MAXXER 450 I SE 2020
KYMCO MAXXER 450 I SE 2019
KYMCO MXU 450 2015
KYMCO MXU 450 2014
KYMCO MXU 450 2013
KYMCO MXU 450 2012
KYMCO MXU 450 2WD E4 2018