INNTECK Clutch Steel Plate Kit for HONDA CR 80, CR 85 1987-2007

On HONDA CR 80, CR 85 from 1987 to 2007, the INNTECK ACS301 clutch steel plate kit fits in place of the original part. The steel plates, made of steel or aluminium depending on the model, are the surface the friction plates grip against. Warped or glazed, they stop the clutch from working properly, even with new linings.

Specifications

• Brand: INNTECK
• Manufacturer part number: ACS301
• Engine: 2-stroke

When to replace it?

• Clutch that drags or judders, neutral hard to find with the engine hot.
• Plates blued, glazed or marked at the tabs.
• Warpage out of tolerance, measured with a feeler gauge on a surface plate (or a sheet of glass).

Every time you replace the friction plates, if the steel plates are warped or blued, and after a bad bout of clutch slip.

Fitting tips

1. Oil the plates before fitting them.
2. Alternate friction plates and steel plates in the original order, without leaving one out.
3. Check the clutch springs and tighten to the manufacturer's torque.
4. Close up with a new clutch cover gasket and fresh gearbox oil.

Spare parts and items to plan

• Clutch plates : TECNIUM 3031000 · TECNIUM 3030666
• Clutch springs : BARNETT · TECNIUM 250 L
• Clutch cover gasket : see the selection
• Gearbox oil : LIQUI MOLY 10W30 1 L · LIQUI MOLY 1 L

Frequently asked questions

Should the friction plates be replaced at the same time?
If they're close to the minimum thickness, yes: new friction plates and new steel plates give you a clutch that's as good as new.

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
HONDA CR 80 2002
HONDA CR 80 2001
HONDA CR 80 2000
HONDA CR 80 1999
HONDA CR 80 1998
HONDA CR 80 1997
HONDA CR 80 1996
HONDA CR 80 1995
HONDA CR 80 1994
HONDA CR 80 1993
HONDA CR 80 1992
HONDA CR 80 1991
HONDA CR 80 1990
HONDA CR 80 1989
HONDA CR 80 1988
HONDA CR 80 1987
HONDA CR 85 2007
HONDA CR 85 2006
HONDA CR 85 2005
HONDA CR 85 2004
HONDA CR 85 2003