HOT RODS OEM Crankshaft for YAMAHA YFM 700 GRIZZLY EPS 4WD, YFM 700 GRIZZLY EPS X 4WD, YFM 700 KODIAK 4WD 2016-2018

HOT RODS offers this complete crankshaft for YAMAHA YFM 700 GRIZZLY EPS 4WD, YFM 700 GRIZZLY EPS X 4WD, YFM 700 KODIAK 4WD, YFM 700 KODIAK EPS 4WD 2016-2018. The crankshaft is the engine’s main shaft: the rod turns it and it drives the clutch and gearbox.

Why a complete crankshaft?

The benefits:

• Ready to fit, no specialist needed to press in a rod.
• Bottom end renewed in one go.
• Often cheaper than rebuilding a badly worn crank.

Why choose HOT RODS?

Hot Rods crankshafts come assembled and trued: double-forged 8620 steel rod and hardened crankpin (58-62 HRC), a ready-to-fit bottom-end rebuild.

When should you replace the crankshaft on your YAMAHA YFM 700 GRIZZLY EPS 4WD?

Unusual vibration, a deep knock that follows engine speed or play in the con-rod: the bottom end needs a rebuild.

The manufacturer publishes no hour interval for this model: have the con-rod play checked at every piston change. Cross-Mania guideline: rebuild the bottom end every 2 to 3 top-end rebuilds.

Specifications and fitting tips

• Engine type: 4-stroke
• Displacement: up to 700 cc
• Manufacturer part number: HR00144

Cross-Mania tip: Take the opportunity, with the cases open, to replace the crankshaft bearings and oil seals.

Also needed with this part

• 4-stroke engine oil : LIQUI MOLY 10W40 1 L · MOTUL 10W50

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
YAMAHA YFM 700 GRIZZLY EPS 4WD 2018
YAMAHA YFM 700 GRIZZLY EPS 4WD 2017
YAMAHA YFM 700 GRIZZLY EPS 4WD 2016
YAMAHA YFM 700 GRIZZLY EPS X 4WD 2018
YAMAHA YFM 700 GRIZZLY EPS X 4WD 2017
YAMAHA YFM 700 GRIZZLY EPS X 4WD 2016
YAMAHA YFM 700 KODIAK 4WD 2018
YAMAHA YFM 700 KODIAK 4WD 2017
YAMAHA YFM 700 KODIAK 4WD 2016
YAMAHA YFM 700 KODIAK EPS 4WD 2018
YAMAHA YFM 700 KODIAK EPS 4WD 2017
YAMAHA YFM 700 KODIAK EPS 4WD 2016