HOT RODS Bottom end engine kit - BLASTER for YAMAHA YFS 200 BLASTER 2WD 1990-2007

HOT RODS offers this complete crankshaft for YAMAHA YFS 200 BLASTER 2WD 1990-2007. The crankshaft is the engine’s main shaft: the rod turns it and it drives the clutch and gearbox.

Why a complete crankshaft?

The benefits:

• Ready to fit, no specialist needed to press in a rod.
• Bottom end renewed in one go.
• Often cheaper than rebuilding a badly worn crank.

Why choose HOT RODS?

Hot Rods crankshafts come assembled and trued: double-forged 8620 steel rod and hardened crankpin (58-62 HRC), a ready-to-fit bottom-end rebuild.

When should you replace the crankshaft on your YAMAHA YFS 200 BLASTER 2WD?

Unusual vibration, a deep knock that follows engine speed or play in the con-rod: the bottom end needs a rebuild.

The manufacturer publishes no hour interval for this model: have the con-rod play checked at every piston change. Cross-Mania guideline: rebuild the bottom end every 2 to 3 top-end rebuilds.

Specifications and fitting tips

• Hot rods crankshaft
• Hot Rods bearings and seals
• Manufacturer part number: 3030404

Cross-Mania tip: Take the opportunity, with the cases open, to replace the crankshaft bearings and oil seals.

Also needed with this part

• 4-stroke engine oil : LIQUI MOLY 10W40 1 L · MOTUL 10W50

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
YAMAHA YFS 200 BLASTER 2WD 2007
YAMAHA YFS 200 BLASTER 2WD 2006
YAMAHA YFS 200 BLASTER 2WD 2005
YAMAHA YFS 200 BLASTER 2WD 2004
YAMAHA YFS 200 BLASTER 2WD 2003
YAMAHA YFS 200 BLASTER 2WD 2002
YAMAHA YFS 200 BLASTER 2WD 2001
YAMAHA YFS 200 BLASTER 2WD 2000
YAMAHA YFS 200 BLASTER 2WD 1999
YAMAHA YFS 200 BLASTER 2WD 1998
YAMAHA YFS 200 BLASTER 2WD 1997
YAMAHA YFS 200 BLASTER 2WD 1996
YAMAHA YFS 200 BLASTER 2WD 1995
YAMAHA YFS 200 BLASTER 2WD 1994
YAMAHA YFS 200 BLASTER 2WD 1993
YAMAHA YFS 200 BLASTER 2WD 1992
YAMAHA YFS 200 BLASTER 2WD 1991
YAMAHA YFS 200 BLASTER 2WD 1990