WISECO Crankshaft Kit- Blaster 200 for YAMAHA YFS 200 BLASTER 2WD 1990-2007

WISECO offers this complete crankshaft for YAMAHA YFS 200 BLASTER 2WD 1990-2007. The crankshaft is the engine’s main shaft: the rod turns it and it drives the clutch and gearbox.

Why a complete crankshaft?

The benefits:

• Ready to fit, no specialist needed to press in a rod.
• Bottom end renewed in one go.
• Often cheaper than rebuilding a badly worn crank.

Why choose WISECO?

Wiseco crankshafts have a heat-treated, shot-peened rod and precision-machined flywheels, from the American engine specialist since 1941.

When should you replace the crankshaft on your YAMAHA YFS 200 BLASTER 2WD?

Unusual vibration, a deep knock that follows engine speed or play in the con-rod: the bottom end needs a rebuild.

The manufacturer publishes no hour interval for this model: have the con-rod play checked at every piston change. Cross-Mania guideline: rebuild the bottom end every 2 to 3 top-end rebuilds.

Specifications and fitting tips

• Only one part number to stock and order
• Crankshafts are factory assembled and precision trued to OEM specifications
• Manufacturer part number: WWPC105

Cross-Mania tip: Take the opportunity, with the cases open, to replace the crankshaft bearings and oil seals.

Also needed with this part

• 4-stroke engine oil : LIQUI MOLY 10W40 1 L · MOTUL 10W50

Compatibility

Check the exact model and year of your bike in the list below before ordering.

Fits:
YAMAHA YFS 200 BLASTER 2WD 2007
YAMAHA YFS 200 BLASTER 2WD 2006
YAMAHA YFS 200 BLASTER 2WD 2005
YAMAHA YFS 200 BLASTER 2WD 2004
YAMAHA YFS 200 BLASTER 2WD 2003
YAMAHA YFS 200 BLASTER 2WD 2002
YAMAHA YFS 200 BLASTER 2WD 2001
YAMAHA YFS 200 BLASTER 2WD 2000
YAMAHA YFS 200 BLASTER 2WD 1999
YAMAHA YFS 200 BLASTER 2WD 1998
YAMAHA YFS 200 BLASTER 2WD 1997
YAMAHA YFS 200 BLASTER 2WD 1996
YAMAHA YFS 200 BLASTER 2WD 1995
YAMAHA YFS 200 BLASTER 2WD 1994
YAMAHA YFS 200 BLASTER 2WD 1993
YAMAHA YFS 200 BLASTER 2WD 1992
YAMAHA YFS 200 BLASTER 2WD 1991
YAMAHA YFS 200 BLASTER 2WD 1990