- New
VHM Connecting Rod Kit for FANTIC XE 125, XX 125 and YAMAHA YZ 125 2022-2026
€430.90
Tax Included
VHM connecting rod kit for FANTIC XE 125, XX 125 and YAMAHA YZ 125 from 2022 to 2026.
On FANTIC XE 125, XX 125 and YAMAHA YZ 125 from 2022 to 2026, the VHM CRK2001 connecting rod kit fits in place of the original part. Between the piston and the crankshaft, the connecting rod takes every combustion and every climb through the revs. Replacing the rod, crank pin and bearing in time prevents engine failure.
Specifications
- Brand: VHM
- Manufacturer part number: CRK2001
- Engine: 2-stroke
When to replace it?
- Vertical play at the big end at top dead centre.
- Side play out of tolerance, signs of overheating (bluing).
- Vibration and dull noise from the bottom end.
During a bottom end rebuild, at the intervals in the service manual, and without delay as soon as play appears at the big end.
Fitting tips
- Replacing a connecting rod means pressing the crankshaft apart and then realigning it: with a dial indicator, you check the run-out, i.e. the deviation in rotation measured at the end of the shaft, which must stay within a few hundredths of a millimetre at most. Leave this job to a properly equipped workshop if you don't have a press and a truing stand.
- Replace the crankshaft bearings and oil seals at the same time.
- Check the big-end side play after assembly.
- Close up the engine with a complete engine gasket kit and tighten to the manufacturer's torque.
- Check the gearbox bearings, then fill up with fresh oil and fit a new spark plug.
Why VHM?
Founded in 1995, VHM specialises in racing engine parts for motocross, road racing and karting. The brand started out with cylinder heads featuring interchangeable combustion chambers, which became its speciality, and then developed crankshafts, connecting rods and gasket kits.
Spare parts and items to plan
- Crankshaft bearings and seals : CENTAURO
- Complete engine gasket kit : MOOSE 808641MSE · MOOSE 811641MSE
- Gearbox bearings : HOT RODS TBK0064 · HOT RODS TBK0063
- 2-stroke oil : LIQUI MOLY 1 L · MOTUL 1 L
- Spark plug : NGK
Frequently asked questions
Can I fit the connecting rod myself?
Yes, if you have a press and a crankshaft truing stand; otherwise, an engine workshop can do it for you.
What else should I plan for?
The crankshaft bearing and seal kit, the complete engine gasket kit, the gearbox bearings if required, engine oil and a spark plug.
Compatibility
Check the exact model and year of your bike in the list below before ordering.
Fits:
FANTIC XE 125 2025
FANTIC XE 125 2024
FANTIC XE 125 2023
FANTIC XE 125 2022
FANTIC XX 125 2025
FANTIC XX 125 2024
FANTIC XX 125 2023
FANTIC XX 125 2022
YAMAHA YZ 125 2026
YAMAHA YZ 125 2025
YAMAHA YZ 125 2024
YAMAHA YZ 125 2023
YAMAHA YZ 125 2022
No customer reviews for the moment.
VHM connecting rod kit for FANTIC XE 125, XX 125 and YAMAHA YZ 125 from 2022 to 2026.
VHM Connecting Rod Kit for FANTIC XE 125, XX 125 and YAMAHA YZ 125 2022-2026
€430.90
Tax Included