HOT RODS offers you this complete connecting rod kit for your YAMAHA YZ 250cc and YAMAHA WR 250cc. This complete kit will allow you to refurbish your crankshaft which may have a play from top to bottom. Instead of changing the complete crankshaft, you will often just have to change the connecting rod. This connecting rod is a cast model sold with its needle cage, its anti-friction shims and its crank pin. It has the same original dimensions. No adaptation is necessary. To change a connecting rod, you will need a press, a balancing bench and a little patience. If you don't have the material to do that, you can send us your crankshaft so that we can do the assembly ourselves. You can contact us first by e-mail to get a quote. All dimensions of the connecting rod are given below.

Big End I.D. rod: 32mm

Width of connecting rod head: 19.900mm

Center to Center Connecting Rod: 125mm

Small end connecting rod I.D.: 23mm

Connecting rod width: 19.900mm

Engine type: 2 stroke

Includes connecting rod, crank, crank bearing, wrist bearing and thrust washers

Spindle length: 59.900mm

EP washer: 1mm

Fits on :

YAMAHA WR 250 Z 1998

YAMAHA WR 250 Z 1997

YAMAHA WR 250 Z 1996

YAMAHA WR 250 Z 1995

YAMAHA WR 250 Z 1994

YAMAHA WR 250 Z 1993

YAMAHA WR 250 Z 1992

YAMAHA WR 250 Z 1991

YAMAHA WR 250 Z 1990

YAMAHA YZ 250 1998

YAMAHA YZ 250 1997

YAMAHA YZ 250 1996

YAMAHA YZ 250 1995

YAMAHA YZ 250 1994

YAMAHA YZ 250 1993

YAMAHA YZ 250 1992

YAMAHA YZ 250 1991

YAMAHA YZ 250 1990

YAMAHA YZ 250 1982

YAMAHA YZ 250 1981

YAMAHA YZ 250 1980

YAMAHA YZ 250 1979

YAMAHA YZ 250 1978

YAMAHA YZ 250 1977